Токарные инструменты Iscar (часть 1) 2026 - страница 657

FACE GROOVING DAXN CDX 25 CR HFIR-M DAXX CW DAXN-DAXX Cartridges for Face Min Max HF H DAXN-DAXX Grooving and Turning 3 60 130 4,5,6 60 ∞ CWN-CWX WF B CWN-CWX OAL Right-hand shown Designation CWN(1) CWX(2) CDX WF HF H B OAL MIID(3) CR HFIR-16M 3.00 6.00 5.00 20.00 16.0 20.0 16.0 67.00 GRIP 4004Y CR HFIR-20M 3.00 6.00 5.00 24.00 20.0 24.0 20.0 72.00 GRIP 4004Y • Used for shallow internal face machining to max. 5 mm depth of groove • Inserts in 3-6 mm widths can be mounted on the cartridges • Only DGN & GRIP 4.. - 6.. inserts can be used with the right-hand tools (1) Minimum cutting width (2) Maximum cutting width (3) Master insert identification For inserts, see pages: DGN-MF (541) • GRIPA (296) • GRIPA (full radius) (296) • HFPR/L (656) • HFPR/L (full radius) (656) • GRIP (294) • GRIP (full radius) (295) • DGN/DGNC/DGNM-C (539) • DGN/DGNM-J/JS/JT (544) • DGN-W (540) CR-HFIR/L-M F Assembly Dimensions E 45º L1 R M8 Assembly Screw Designation E L1(1) F(2) Rmax. Assembly Screw(3) CR HFIR/L-16M 25 8 20 6 M8X30 CR HFIR/L-20M 30 10 24 6 M8X30 (1) L adjustment±1 (2) F adjustment +0�3 -0 (3) Assembly screws ISO 7380 are recommended Spare Parts Designation CR HFIR-16M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN916 HW 2.0 CR HFIR-20M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN913 HW 2.0 ±0.1 HFPN Utility Double-Ended Face Machining Inserts HFPN 2010 7° CW RE INSL Recommended Dimensions Machining Data f groove IC808 Designation CW RE CWTOL(1) RETOL(2) INSL (mm/rev) HFPN 2002 2.00 0.20 0.040 0.030 19.40 • 0.03-0.10 HFPN 2010 2.00 1.00 0.040 0.030 19.40 • 0.03-0.10 • For cutting speed recommendations and user guide, see pages 676-688 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) For tools, see pages: HFFA (637) • HFFH (637) 655