Токарные инструменты Iscar (часть 1) 2026 - страница 305

GROOVE-TURN LH GHDR/L-JHP (short pocket) Grooving and Turning HF H Tools with Channels for 20 mm shank tools G 1/8"-28 typx2 WB (3 inlet ports) CDX OAL High-Pressure Coolant Bar Max WF CWN-CWX B Right-hand shown Designation CWN(2) CWX(3) H CDX(4) B OAL LH WF WB HF GHDR/L 20-3-JHP 2.80 4.00 20.0 9.00 20.0 120.00 29.0 18.80 2.40 20.0 GHDR/L 25-3-JHP 2.80 4.00 25.0 9.00 25.0 140.00 44.0 23.80 2.40 25.0 GHDR/L 20-4-JHP 4.00 5.00 20.0 10.00 20.0 120.00 29.0 18.40 3.20 20.0 GHDR/L 25-4-JHP 4.00 5.00 25.0 10.00 25.0 140.00 45.0 23.40 3.20 25.0 GHDR/L 25-5-JHP 5.00 6.40 25.0 12.00 25.0 140.00 46.0 22.90 4.20 25.0 GHDR/L 25-P8-JHP (1) 7.00 10.00 25.0 16.50 25.0 150.00 50.0 21.80 6.50 25.0 • For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance • When using GIVR/L inserts, tool holder’s seat needs to be modified • For user guide and accessories see pages 475-492 (1) Used with GIMF, GIMY, GIPY, GIMM, GITM, GPV, GIMY-F, GIMM 8CC,GIMT,GIMN,GITM (full radius), GIMY (full radius) inserts. (2) Minimum cutting width (3) Maximum cutting width (4) Cutting depth maximum For inserts, see pages: GIA-K (W=3-6) (329) • GIF (328) • GIF (full radius) (329) • GIF-E (W=4-6 full radius) (324) • GIF-E (W=4-6) (322) • GIM-C (587) • GIM-J (587) • GIM-J-RA/LA (588) • GIM-UT (589) • GIM-UT-RA/LA (590) • GIM-W (588) • GIM-W-RA/LA (589) • GIMF (317) • GIMM 8CC (664) • GIMN (319) • GIMT (316) • GIMY (318) • GIMY (full radius) (320) • GIMY-F (321) • GIP (327) • GIP (full radius) (327) • GIP-E (323) • GIP-E (full radius) (325) • GIP-UN (335) • GIPA (full radius W=3-6) (333) • GIPA (W=3-6) (332) • GIPM-A46 / GIP-1250 (430) • GIPY (331) • GITM (330) • GITM (full radius) (331) • GIVR/L (316) • GPV (336) • TIP-MT (727) • TIP-P-BSPT (768) • TIP-P-BSW (759) • TIP-P-ISO (743) • TIP-P-NPT (763) • TIP-P-UN (753) • TIP-WT (718) Flow Rate vs. Pressure GHDR...-JHP G 1/8”-28 Adaptation Nipple 70 Bar 100 Bar 140 Bar Hose Flow Rate Flow Rate Flow Rate Designation (liters/min) (liters/min) (liters/min) GHDR/L 20-3-JHP 5-7 7-9 9-11 GHDR/L 20-4-JHP 6-8 10-12 12-14 GHDR/L 25-3-JHP 6-8 8-10 10-12 GHDR/L 25-4-JHP 10-12 14-16 16-18 GHDR/L 25-5-JHP 13-16 19-21 22-24 PLUG G 1/8”-28 Copper Seal Washer 1/8” Key: HW 5.0 Spare Parts Designation GHDR/L 20-3-JHP SR M5X16 DIN912 HW 4.0(a) PLG G1/8 TL360 HW 5.0 GHDR/L 25-3-JHP SR M5X20DIN912 HW 4.0(a) PLG 1/8ISO1179 HW 5.0 GHDR/L 20-4-JHP SR M6X16 DIN912 PLG G1/8 TL360 HW 5.0 GHDR/L 25-4-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 GHDR/L 25-5-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 GHDR/L 25-P8-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0 (a) For optional key with limited tightening torque see page 484 303