Токарные инструменты Iscar (часть 1) 2026 - страница 317

GROOVE-TURN SR M6X25DIN912 12.9U 14.0 PLG 1/8ISO1179 (Key: HW5.0) (Key:HW5.0) GHAR/L-JHP HF H OR 5X1N Bar Max Holders with High-Pressure G 1/8"-28 typ.x2 SR M6X12DIN6912 HBH OHN (Key: HW5.0) Coolant Channels for Grooving OAL 7.0 and Turning Adapters 4.5 SR 14-519 WF B (Key: T-20/5) CDX 7.0 Right-hand shown Designation H HF B WF OAL OHN(1) HBH CDX(2) GHAR/L 25-8-JHP 25.0 25.0 25.0 16.0 124.50 25.00 14.0 25.50 • For user guide and accessories see pages 475-492 (1) Minimum overhang (2) See specific adapter dimensions For tools, see page: GADR/L-JHP (320) Spare Parts Designation GHAR/L-JHP SR 14-519 T-20/5 OR 5X1N SR M6X12DIN6912 SR M6X25DIN912 PLG 1/8ISO1179 HW 5.0X120 MM WB_2 OAL GADR/L-JHP Adapters with High-Pressure OAH HF Coolant Channels Carrying Groove-Turn Inserts for up to CDX WB Bar Max 25 mm Deep Machining WF CWN-CWX Right-hand shown Designation CWN(1) CWX(2) CDX(3) WB HF OAH OAL WB_2 WF GADR/L 8-JHP 6.60 8.30 25.50 6.00 32.0 42.00 63.00 17.0 14.00 GADR/L 10-JHP 8.60 10.30 25.50 7.40 32.0 42.00 63.00 17.7 14.00 • For user guide and accessories see pages 475-492 (1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum For inserts, see pages: GDMA (337) • GDMF (322) • GDMM-CC (674) • GDMN (324) • GDMT (322) • GDMU (324) • GDMY (323) • GDMY (full radius) (325) • GDMY-F (326) • GDPY (328) • GIA-K (long pocket) (335) • GIF (long pocket) (333) • GIF-E (W=8,10 full radius) (329) • GIF-E (W=8,10) (327) • GIPA/GIDA 8 (full radius) (339) Flow Rate vs. Pressure 70 Bar 100 Bar 140 Bar Designation Flow Rate (liters/min) Flow Rate (liters/min) Flow Rate (liters/min) GADR/L-JHP 15-17 23-25 27-29 OHX CGHN-8-10D Heavy Duty Deep Grooving H HF and Turning Blades CWN-CWX OAL WB 150˚ Designation CWN(1) CWX(2) OHX(3) WB HF H OAL CGHN 52-8D 8.00 8.30 50.0 7.40 45.0 52.6 190.00 SR 76-1637 HW 4.0 CGHN 53-8D 8.00 8.30 70.0 7.40 45.0 52.6 260.00 SR 76-1637 HW 4.0 CGHN 52-10D 10.00 11.00 70.0 9.20 45.0 52.6 190.00 SR 76-1289 HW 5.0 CGHN 53-10D 10.00 11.00 100.0 9.20 45.0 52.6 260.00 SR 76-1289 HW 5.0 • For user guide, see pages 475-492 (1) Minimum cutting width (2) Maximum cutting width (3) Minimum overhang • When using a double-ended insert, grooving depth is limited by the insert For inserts, see pages: GDMF (317) • GDMN (319) • GDMT (317) • GDMU (319) • GDMY (318) • GDMY (full radius) (320) • GDMY-F (321) • GDPY (323) • GIA-K (long pocket) (330) • GIF (long pocket) (328) • GIF-E (W=8,10 full radius) (324) • GIF-E (W=8,10) (322) • GIPA/GIDA 8 (full radius) (334) For holders, see pages: SGTBK (691) • SGTBU/SGTBN (690) 315