Токарные инструменты Iscar (часть 1) 2026 - страница 654

FACE GROOVING DAXN WF HFAIR/L-DG DAXX Adapters for Internal Face Grooving and Turning DAXN-DAXX OAL OHX CW CDX Right-hand shown Designation CW CDX DAXN(1) DAXX(2) WF OHX(3) OAL MIID(4) HFAIL 140C-4T30DG 4.00 30.00 140.0 - 10.90 34.5 68.50 DGN 4003C EDG 33B* HFAIL 75C-4T30DG 4.00 30.00 75.0 140.0 10.90 34.5 68.50 DGN 4003C EDG 33B* HFAIR 140C-4T30DG 4.00 30.00 140.0 - 10.90 34.5 68.50 GRIP 4004Y HFAIR 75C-4T30DG 4.00 30.00 75.0 140.0 10.90 34.5 68.50 GRIP 4004Y HFAIL 55C-5T25DG 5.00 25.00 55.0 70.0 11.90 32.0 66.00 HFPL 5004 EDG 33B* HFAIL 70C-5T25DG 5.00 25.00 70.0 95.0 11.90 32.0 66.00 HFPL 5004 EDG 33B* HFAIR 55C-5T25DG 5.00 25.00 55.0 70.0 11.90 32.0 66.00 GRIP 5005Y HFAIR 70C-5T25DG 5.00 25.00 70.0 95.0 11.90 32.0 66.00 GRIP 5005Y HFAIL 95C-5T35DG 5.00 35.00 95.0 130.0 11.90 39.5 73.50 HFPL 5004 EDG 33B* HFAIR 95C-5T35DG 5.00 35.00 95.0 130.0 11.90 39.5 73.50 GRIP 5005Y HFAIL 130C-5T38DG 5.00 38.00 130.0 180.0 11.90 42.5 76.50 HFPL 5004 EDG 33B* HFAIL 180C-5T38DG 5.00 38.00 180.0 - 11.90 42.5 76.50 HFPL 5004 EDG 33B* HFAIR 130C-5T38DG 5.00 38.00 130.0 180.0 11.90 42.5 76.50 GRIP 5005Y HFAIR 180C-5T38DG 5.00 38.00 180.0 - 11.90 42.5 76.50 GRIP 5005Y HFAIL 70C-6T28DG 6.00 28.00 70.0 100.0 12.00 35.0 69.00 HFPL 6004 EDG 33B* HFAIR 70C-6T28DG 6.00 28.00 70.0 100.0 12.00 35.0 69.00 GRIP 6030Y HFAIL 100C-6T32DG 6.00 32.00 100.0 180.0 12.00 39.0 73.00 HFPL 6004 EDG 33B* HFAIR 100C-6T32DG 6.00 32.00 100.0 180.0 12.00 39.0 73.00 GRIP 6030Y HFAIL 180C-6T38DG 6.00 38.00 180.0 - 12.40 42.5 76.50 HFPL 6004 EDG 33B* HFAIR 180C-6T38DG 6.00 38.00 180.0 - 12.40 42.5 76.50 GRIP 6030Y • After initial groove, no limitation to widening groove outward or toward center • DGN & GRIP inserts can be used only on right-hand tools, HFPR/L right-hand inserts on right-hand tools (same for left-hand), and HGPL inserts only on left-hand tools. • For information regarding compatibility with the HATA system, please refer to the additional information provided for each of the intermediate serrated cartridges: IH-HFAIR • For user guide, see pages 676-688 (1) Minimum penetration diameter (2) Maximum penetration diameter (3) Maximum overhang (4) Master insert identification * Optional, to be ordered separately For inserts, see pages: DGN-MF (541) • GRIP-T (295) • HFPR/L (656) • HFPR/L (full radius) (656) • GRIP (294) • GRIP (full radius) (295) • DGN/DGNC/DGNM-C (539) • DGN/DGNM-J/JS/JT (544) • DGN-W (540) • HGPL (658) • GRIPA (296) • GRIPA (full radius) (296) For holders, see pages: C#-HAD (700) • C#-HAPR/L (700) • HAI-C (651) • HAPR/L (645) • HAR/L (645) • IH-HFAIR (649) • IM-HAD (708) • IM-HAPR/L (708) Adapters can be used for internal machining along bore, and can be mounted on standard HAI boring bars for internal machining and HAR/L, HAPR/L holders for external machining. Boring, Face Grooving and Face Recessing Capacity Boring Face Grooving Face Recessing B Min. =WF (assembly)+G+DCONMS/2 D Min. =2WF (assembly)-B+2G+DCONMS P Min. =2WF (assembly)-B-2CW+2G+DCONMS Bmin. G(1) Dmin. G(1) Pmin. G(1) B B (1) The minimum recommended value for clearance (G) is 0�5 mm * WF (assembly)=WF(adapter)+WF(holder) 652 ISCAR