Токарные инструменты Iscar (часть 1) 2026 - страница 644

FACE GROOVING H MAHPR/L-XL-JHP OAH HBH Holders with High-Pressure LH OAL OAW Coolant Channels for MODULAR-GRIP Perpendicularly B HF Mounted Adapters MHD L5 MHD_2 Right-hand shown Designation H B LH OAL HBH OAH OAW HF L5 MHD MHD_2 MAHPR/L-XL-20-JHP-MCG 20.0 20.0 23.0 120.00 24.0 53.00 45.00 20.0 29.00 50.00 85.00 MAHPR/L-XL-25-JHP-MCG 25.0 25.0 15.0 120.00 19.0 53.00 45.50 25.0 35.00 50.00 90.00 For tools, see pages: DGPAD-XL-JHP (548) • HFPAD-JHP (652) • TAGPAD-XL-JHP (572) • TAGPAD-Y-JHP (594) • TNFPAD-XL-JHP (678) Spare Parts Designation MAHPR/L-XL-20-JHP-MCG SR M5-04451 T-20/5 SR M6X16 DIN912 HW 5.0 OR 5X1N SR M4X4 DIN913 TL360 SR M6X6 DIN913 TL360 PLG G1/8 TL360 SUPPORT MG-XL-5113377 MAHPR/L-XL-25-JHP-MCG SR M5-04451 T-20/5 SR M6X16 DIN912 HW 5.0 OR 5X1N SR M4X4 DIN913 TL360 SR M6X6 DIN913 TL360 PLG G1/8 TL360 SUPPORT MG-XL-5113377 DAXN HFPAD-JHP DAXX Adapters for Face Machining HF OAH ØDAXN-DAXX OAL WF WB CDX CW Right-hand shown Designation CW CDX DAXN(1) DAXX(2) WF HF OAH WB OAL MIID(3) HFPAD 3L-40-T10-JHP 3.00 10.00 40.0 65.0 4.80 24.0 33.00 5.80 39.50 HGPL 3003Y HFPAD 3R-40-T10-JHP 3.00 10.00 40.0 65.0 4.80 24.0 33.00 5.80 39.50 GRIP 3003Y HFPAD 3L-115-T18-JHP 3.00 18.00 115.0 400.0 4.80 24.0 33.00 5.80 43.50 HGPL 3003Y HFPAD 3L-65-T18-JHP 3.00 18.00 65.0 115.0 4.80 24.0 33.00 5.80 43.50 HGPL 3003Y HFPAD 3R-115-T18-JHP 3.00 18.00 115.0 400.0 4.80 24.0 33.00 5.80 43.50 GRIP 3003Y HFPAD 3R-65-T18-JHP 3.00 18.00 65.0 115.0 4.80 24.0 33.00 5.80 43.50 GRIP 3003Y HFPAD 4L-44-T14-JHP 4.00 14.00 44.0 58.0 4.80 24.0 33.00 5.80 40.50 HFPL 4004 HFPAD 4L-58-T14-JHP 4.00 14.00 58.0 88.0 4.80 24.0 33.00 5.80 40.50 HFPL 4004 HFPAD 4L-88-T14-JHP 4.00 14.00 88.0 175.0 4.50 24.0 33.00 5.80 40.50 HFPL 4004 HFPAD 4R-44-T14-JHP 4.00 14.00 44.0 58.0 4.80 24.0 33.00 5.80 40.50 GRIP 4004Y HFPAD 4R-58-T14-JHP 4.00 14.00 58.0 88.0 4.80 24.0 33.00 5.80 40.50 GRIP 4004Y HFPAD 4R-88-T14-JHP 4.00 14.00 88.0 175.0 4.50 24.0 33.00 5.80 40.50 GRIP 4004Y HFPAD 4L-175-T20-JHP 4.00 20.00 175.0 800.0 4.80 24.0 33.00 6.50 45.50 HFPL 4004 HFPAD 4R-175-T20-JHP 4.00 20.00 175.0 800.0 4.80 24.0 33.00 6.50 45.50 GRIP 4004Y HFPAD 5R/L-110-T14-JHP 5.00 14.00 110.0 200.0 4.50 24.0 33.00 6.30 45.50 GRIP 5005Y HFPAD 5L-40-T14-JHP 5.00 14.00 40.0 50.0 4.50 24.0 33.00 6.30 40.50 HFPL 5004 HFPAD 5R/L-50-T14-JHP 5.00 14.00 50.0 75.0 4.50 24.0 33.00 6.30 40.50 HFPL 5004 HFPAD 5L-75-T14-JHP 5.00 14.00 75.0 110.0 4.50 24.0 33.00 6.30 40.50 HFPL 5004 HFPAD 5R-40-T14-JHP 5.00 14.00 40.0 50.0 4.50 24.0 33.00 6.30 40.50 GRIP 5005Y HFPAD 5R-75-T14-JHP 5.00 14.00 75.0 110.0 4.50 24.0 33.00 6.30 40.50 GRIP 5005Y HFPAD 5L-200-T20-JHP 5.00 20.00 200.0 800.0 4.50 24.0 33.00 6.60 45.50 HFPL 5004 HFPAD 5R-200-T20-JHP 5.00 20.00 200.0 800.0 4.50 24.0 33.00 6.60 45.50 GRIP 5005Y HFPAD 6L-60-T14-JHP 6.00 14.00 60.0 100.0 4.50 24.0 33.00 6.80 40.50 HFPL 6004 HFPAD 6R-60-T14-JHP 6.00 14.00 60.0 100.0 4.50 24.0 33.00 6.80 40.50 GRIP 6030Y HFPAD 6L-100-T20-JHP 6.00 20.00 100.0 200.0 4.50 24.0 33.00 6.80 45.50 HFPL 6004 HFPAD 6L-200-T20-JHP 6.00 20.00 200.0 3000.0 4.50 24.0 33.00 7.10 45.50 HFPL 6004 HFPAD 6R-100-T20-JHP 6.00 20.00 100.0 200.0 4.50 24.0 33.00 6.80 45.50 GRIP 6030Y HFPAD 6R-200-T20-JHP 6.00 20.00 200.0 3000.0 4.50 24.0 33.00 7.10 45.50 GRIP 6030Y • WF(assembly)=WF(shank) + WF(adapter) • HGN,GRIP,DGN inserts can be used only with right-hand adapters, HGPL inserts with left-hand adapters • For information regarding compatibility with the HATA system, please refer to the additional information provided for each of the intermediate serrated cartridges: IH-HFPAD • For user guide, see pages 676-688 (1) Minimum axial grooving diameter (2) Maximum axial grooving diameter (3) Master insert identification For inserts, see pages: DGN-MF (541) • DGN-W (540) • DGN/DGNC/DGNM-C (539) • DGN/DGNM-J/JS/JT (544) • DGR/L-B (542) • GRIP (294) • GRIP (full radius) (295) • GRIP-T (295) • GRIPA (296) • GRIPA (full radius) (296) • HFPR/L (656) • HFPR/L (full radius) (656) • HGN-C (549) • HGN-J (550) • HGN-UT (551) • HGPL (658) For holders, see pages: C#-MAHD-JHP (697) • C#-MAHPD-JHP (698) • IH-HFPAD (650) • MAHPR/L-JHP (308) • MAHPR/L-XL-JHP (642) • MAHR/L-JHP (306) • MAHR/L-JHP-MC (307) 642 ISCAR