Токарные инструменты Iscar (часть 1) 2026 - страница 179

TURNING INSERTS 80° 95º 95° WNMG-VL L 95° Double-Sided Trigon Inserts with a Chipformer for High Temperature Alloys and RE Stainless Steel Valves IC S Dimensions Tough 1 Hard Recommended Machining Data ap f IC908 IC806 IC907 Designation L IC S RE (mm) (mm/rev) WNMG 06T308-VL 6.52 9.52 3.97 0.80 • 0.50-3.00 0.07-0.25 WNMG 080404-VL 8.70 12.70 4.76 0.40 • • 0.30-3.00 0.05-0.15 WNMG 080408-VL 8.70 12.70 4.76 0.80 • • 0.50-4.00 0.10-0.25 WNMG 080412-VL 8.70 12.70 4.76 1.20 • 1.00-4.50 0.12-0.25 • For user guide and cutting speed recommendations, see pages 160-170, 274-278 For tools, see pages: A/S-MWLNR/L-W (136) • A/S-PWLNR/L (137) • C#-MULNR/L-MW (20) • C#-PWLNR/L-08-JHP (13) • DWLNR/L (13) • E-PWLNR/L-HEAD (138) • HSK A63WH-MULNR-J12MWX2 (21) • HSK A63WH-MULNR/L-MW (20) • HSK A63WH-MUMNN-MW (21) • MULNR/L-12MW (19) • MWLNR/L-W (22) • PWLNR/L (12) • PWLNR/L-08-JHP (12) • PWLNR/L-X (14) • PWLNR/L-X-JHP (15) • S-DWLNR/L (130) • S-MULNR-MW (139) • DWLNR/L-JHP-MC (14) 80° 95º 95° WNMG-WG L 95° Double-Sided Trigon Wiper Inserts for High Surface Finish at High Feed Turning RE IC S Recommended Dimensions Tough 1 Hard Machining Data IC530N IC520N ap f IC8250 IC8150 IC5005 IC20N IC428 IC807 IC907 Designation IC L S RE (mm) (mm/rev) WNMG 06T304-WG 9.52 6.52 3.97 0.40 • • • • • 0.40-3.00 0.10-0.35 WNMG 06T308-WG 9.52 6.52 3.97 0.80 • • • • • 0.60-3.50 0.10-0.50 WNMG 060404-WG 9.52 6.52 4.76 0.40 • • • • 0.40-3.00 0.10-0.35 WNMG 060408-WG 9.52 6.52 4.76 0.80 • • • 0.60-3.50 0.10-0.50 WNMG 080408-WG 12.70 8.70 4.76 0.80 • • • • • • • • 1.00-3.50 0.10-0.50 WNMG 080412-WG 12.70 8.70 4.76 1.20 • • • • 1.20-4.00 0.30-0.80 • For user guide and cutting speed recommendations, see pages 160-170, 274-278 For tools, see pages: A-PWLNR/L-X/G (138) • A/S-MWLNR/L-W (136) • A/S-PWLNR/L (137) • C#-MULNR/L-MW (20) • C#-PWLNR/L-08-JHP (13) • C#-PWLNR/L-X (17) • C#-PWLNR/L-X-JHP (18) • DWLNR/L (13) • E-PWLNR/L-HEAD (138) • HSK A63WH-MULNR-J12MWX2 (21) • HSK A63WH-MULNR/L-MW (20) • HSK A63WH-MUMNN-MW (21) • MULNR/L-12MW (19) • MWLNR/L-W (22) • PWLNR/L (12) • PWLNR/L-08-JHP (12) • PWLNR/L-X (14) • PWLNR/L-X-JHP (15) • PWLNR/L-X-JHP-MC (16) • S-DWLNR/L (130) • S-MULNR-MW (139) • DWLNR/L-JHP-MC (14) 80° 95º 95° WNMG-WF L 95° Double-Sided Trigon Wiper Inserts for Finishing Operations at High Feeds RE IC S Dimensions Tough 1 Hard Recommended Machining Data IC530N IC8150 ap f IC807 IC907 Designation L IC S RE (mm) (mm/rev) WNMG 060402-WF 6.52 9.52 4.76 0.20 • 0.20-3.00 0.05-0.25 WNMG 060404-WF 6.52 9.52 4.76 0.40 • • 0.50-3.00 0.05-0.30 WNMG 060408-WF 6.52 9.52 4.76 0.80 • 0.80-3.50 0.07-0.30 WNMG 080408-WF 8.70 12.70 4.76 0.80 • • 0.80-3.50 0.07-0.35 WNMG 080412-WF 8.70 12.70 4.76 1.20 • 0.80-3.50 0.07-0.35 • For user guide and cutting speed recommendations, see pages 160-170, 274-278 For tools, see pages: A-PWLNR/L-X/G (138) • A/S-MWLNR/L-W (136) • A/S-PWLNR/L (137) • C#-MULNR/L-MW (20) • C#-PWLNR/L-08-JHP (13) • C#-PWLNR/L-X (17) • C#-PWLNR/L-X-JHP (18) • DWLNR/L (13) • HSK A63WH-MULNR-J12MWX2 (21) • HSK A63WH-MULNR/L-MW (20) • HSK A63WH-MUMNN-MW (21) • MULNR/L-12MW (19) • MWLNR/L-W (22) • PWLNR/L (12) • PWLNR/L-08-JHP (12) • PWLNR/L-X (14) • PWLNR/L-X-JHP (15) • PWLNR/L-X-JHP-MC (16) • S-DWLNR/L (130) • S-MULNR-MW (139) • DWLNR/L-JHP-MC (14) 177