Фрезерные инструменты Iscar 2026 - страница 437

CUTTERS FOR ALUMINUM HM90 EAL-16 Long Reach Endmills Carrying DC DCONMS Rd° HM90 APCR 1605 Inserts APMX for Machining Aluminum LH OAL kg Designation DC CICT(1) APMX(2) LH OAL DCONMS Shank(3) RPMX(4) RMPX°(5) HM90 EAL-D25-C24L180-16 25.00 1 15.50 - 180.00 24.00 C 43862 25.9 0.56 HM90 EAL-D25-C25L125-16 25.00 1 15.50 69.0 125.00 25.00 C 43862 25.9 0.38 HM90 EAL-D25-C25L200-16 25.00 1 15.50 65.0 200.00 25.00 C 43862 25.9 0.62 HM90 EAL-D32-C32L150-16 32.00 2 15.50 90.0 150.00 32.00 C 29930 22.4 0.74 HM90 EAL-D32-C32L200-16 32.00 2 15.50 80.0 200.00 32.00 C 29930 22.4 1.02 HM90 EAL-D40-C32L220-16 40.00 2 15.50 45.0 220.00 32.00 C 26770 16.9 1.28 • Insert tightening torque: 600 Nxcm • HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools. • For user guide, see pages 616-621 (1) Number of inserts (or edges for solid tool) (2) D.O.C. changes according to insert radius. APMX 15.5 is the value for HM90 APCR 160520R-P insert (3) C-Cylindrical (4) Maximum RPM (5) Maximum ramping angle For inserts, see pages: HM90 APCR 1605..R-P (534) Spare Parts Designation HM90 EAL-D25-C24L180-16 SR 14-592SM BLD T20/M7 SW6-T HM90 EAL-D25-C25L125-16 SR 14-592SM BLD T20/S7 SW6-T HM90 EAL-D25-C25L200-16 SR 14-592SM BLD T20/M7 SW6-T HM90 EAL-D32-C32L150-16 SR 14-0180 BLD T20/M7 SW6-T HM90 EAL-D32-C32L200-16 SR 14-0180 BLD T20/M7 SW6-T HM90 EAL-D40-C32L220-16 SR 14-0180 BLD T20/M7 SW6-T OAL LF HM90 EAL-M-16-JHP DRVS 90° Endmills with a FLEX-FIT Rd° Threaded Adaptation Carrying DC THSZMS DCONMS HM90 APCR 1605... Inserts for Machining Aluminum APMX kg Designation DC CICT(1) APMX DCONMS THSZMS LF OAL RMPX°(2) RPMX(3) DRVS(4) TQ_3(5) HM90 EAL D32-2-M16-16-JHP 32.00 2 15.50 29.00 M16 40.00 65.00 22.4 45643 25.0 40 0.13 HM90 EAL D40-2-M16-16-JHP 40.00 2 15.50 29.00 M16 40.00 65.00 16.9 36809 25.0 40 0.18 New • For adaptation, see page 303 • For user guide, see pages 616-621 • When mounting items with FLEX-FIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (or edges for solid tool) (2) Maximum ramping angle (3) Maximum RPM (4) Torque key size (5) Tool tightening torque (Nxm) For inserts, see pages: HM90 APCR 1605..R-P (534) For holders, see pages: BT-ODP (FLEX-FIT) (359) • C#-ODP (FLEX-FIT) (359) • CAB M-M (FLEX-FIT) (358) • DIN69871-ODP (360) • ER-ODP (360) • HSK A-ODP (FLEX-FIT) (361) • S M (357) • S M-C-H (357) Spare Parts Designation HM90 EAL-M-16-JHP SR 14-0180 BLD T20/M7 SW6-T 435