Каталог Sumitomo фрезы со сменными пластинами - страница 111

SEC-WaveRadius Mill Rake Angle Radial Axial −5° 10° 8mm P M K N N S H Steel Stainless Steel Cast Iron Non-Ferrous Metal Aluminum Exotic Alloy Hardened Steel G G G G RSX(F) 16000R(S) Type Milling of Steel, Stainless Steel, Cast Iron and Exotic Alloys Fig 1 DCSFMS Fig 2 DCSFMS Fig 3 DCSFMS Fig 4 DCSFMS Fig 5 DCSFMS DCB DCB DCB DCB ø66.7 KWW KWW KWW KWW DCB KWW KDP 4-ø14 CBDP KDP KDP KDP KDP CBDP CBDP CBDP CBDP LF LF LF LF LF ø17 D2 D2 D1 D1 D1 D1 D1 DCX DCX DCX DCX DCX ■ Body (RSX16000RS/R) Dimensions (mm) Max. Diameter Boss Height Hole Size Grooving Width Grooving Depth Mounting Depth Bolt Bolt No. of Weight Cat. No. Stock (kg) Fig DCX DCSFMS LF DCB KWW KDP CBDP D1 D2 Teeth RSX 16063RS D 63 50 40 22 10.4 6.3 20 18 11 4 0.5 1 Metric 16080RS D ＊ 80 55 50 27 12.4 7.0 25 20 14 5 0.9 1 16100RS D 100 70 50 32 14.4 8.5 32 46 - 6 1.3 3 16125RS D 125 80 63 40 16.4 9.5 29 52 29 6 2.6 1 RSX 16080R D ＊ 80 55 50 25.4 9.5 6.0 25 20 13 5 0.9 1 Inch 16100R D ＊ 100 70 63 31.75 12.7 8.0 32.5 46 28 6 1.8 2 16125R D 125 80 63 38.1 15.9 10.0 35.5 55 30 6 2.7 1 ■ Body (RSXF16000RS/R) Extra-Fine Pitch RSXF 16063RS D 63 50 40 22 10.4 6.3 20 18 11 5 0.4 1 16080RS D ＊ 80 55 50 27 12.4 7.0 25 20 14 6 0.8 1 Metric 16100RS D 100 70 50 32 14.4 8.5 32 46 - 7 1.3 3 16125RS D 125 80 63 40 16.4 9.5 29 52 29 8 2.5 1 16160RS 160 130 63 40 16.4 9.5 29 88 - 10 4.8 5 RSXF 16080R D ＊ 80 55 50 25.4 9.5 6.0 25 20 13 6 0.8 1 16100R D ＊ 100 70 63 31.75 12.7 8.0 32.5 46 28 7 1.7 2 Inch 16125R D 125 80 63 38.1 15.9 10.0 35.5 55 30 8 2.6 1 16160R 160 100 63 50.8 19.0 11.0 38 72 - 10 4.3 4 H Inserts are not included. Check the arbor attachment size (DCB) when selecting the cutter. *Please use JIS B1176 hexagonal bolt (ø80: M12x30 to 35mm, ø100: M16x40 to 45mm) for securing ø80/ø100 cutter to the arbor. Cutters Milling ■ Inserts P Steel M Stainless Steel K Cast Iron S Exotic Alloy Face Grade Coated Carbide Milling IC±0.025 High Speed/Light Shoulder Milling Application General Purpose High Feed Roughing K Dimensions (mm) ±0.025 ±0.025 IC S Inscribed Thickness Radius ACK300 ACP200 Circle ●Cross Section of Cutting Edge ACM100 ACM200 ACM300 Cat. No. Multi- Purpose IC S R/ RDET 1606M0EN-G D D D D D 16 6.5 G Type H Type Profiling 1606M0EN-H D D D D D 16 6.5 Groove/ T-Slot ■ Identification Details ■ Recommended Cutting Conditions Chamfering Aluminum/ RSX (1) F (2) 16 063 R S (3) (4) (5) (6) ISO Work Material Hardness Cutting Speed （m/min） c Feed Rate （mm/t） z Insert Min.- Optimum - Max. Min.- Optimum - Max. Grade Light Alloys High-Speed Cast Iron Cutter Series Extra-Fine Pitch Insert Size Cutter Diameter Direction Metric Bore Carbon Steel 180 to 280HB 100-160-200 0.20 - 0.40 - 0.60 ACP200 P Alloy Steel 180 to 280HB 100-140-180 0.20 - 0.30 - 0.40 ACP200 ■ Parts Cr Ferritic 200HB 150-180-200 0.15 - 0.25 - 0.35 ACM300 80-120-180 0.15 - 0.25 - 0.35 ACM300 Stainless Steel Martensitic 200 to 330HB Wrench Screw Anti-seizure Cream M Austenitic 200HB 150-180-200 0.15 - 0.25 - 0.35 ACM300 Cr-Ni 2 Phase Structures 230 to 270HB (Austenitic・Ferritic) 80-120-180 0.15 - 0.25 - 0.35 ACM200 Nm Deposition Hardened Structures 330HB 60-100-160 0.15 - 0.25 - 0.35 ACM200 TRDR20IP BFTX0511IP 5.0 SUMI-P K Cast Iron 250HB 80-120-160 0.10 - 0.30 - 0.40 ACK300 N m Recommended Tightening Torque（N・m） Heat-Resistant Alloy Ni-Based Material 250 to 350HB 20- 30 - 40 0.10 - 0.20 - 0.30 ACM100 S Pure Titanium (99.5%) (Rm400) 60- 80 -100 0.10 - 0.20 - 0.30 ■ Notes for inserts set-up H108 Titanium ACM200 α+β Alloy (Rm1050) 40- 50 - 60 0.10 - 0.20 - 0.30 ● mark: Standard stocked item (expanded item) H111