Модульные инструментальные системы линейки KM4X Kennametal 2017 - страница 141

Предыдущая страница Следующая страница

Навигация

Metalcutting Safety IMPORTANT SAFETY INSTRUCTIONS Read before using the tools in this catalog! Projectile and Fragmentation Hazards: Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse. To avoid injury: • Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby. • Always make sure all machine guards are in place. Breathing and Skin Contact Hazards: Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse. Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse. To avoid injury: • Always wear breathing protection and safety goggles when grinding. • Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding. • Avoid skin contact with dust or mist. For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health Regulations, Part 1910, Title 29 of the Code of Federal Regulations. These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The technical information included in this catalog and recommendations on machining practices may not apply to your particular operation. For more information, consult the Kennametal Metalcutting Safety booklet, available free from Kennametal at 724 539 5747 or fax 724 539 5439. For specific product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724 539 5066 or fax 724 539 5372. Kennametal, the stylized K, Beyond Evolution, Drill Fix, Hydroforce, Kenclamp, KM, KMTS, KM4X, KM4X63, KM4X100, KM4X125, KM4X-LOC II, KM-TS, NOVO, Top Cut Plus, Top Notch and Whistle Notch are trademarks of Kennametal, Inc. and are used as such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of the Kennametal trademark or other intellectual property rights concerning that name or logo. Kelch ® is a registered trademark of the Bemis Manufacturing Company. OTT ® is a registered trademark of Ott-Jakob Spanntechnik GmbH. Rengage ® and Renishaw ® are registered trademarks of Renishaw, plc. Safe-Lock™ is a trademark of Haimer GmbH. Sandvik ® is a registered trademark of Sandvik Coromant ABD. Zoller ® is a registered trademark of E. Zoller GmbH & Co. KG. ©Copyright 2016 by Kennametal Inc., Latrobe, PA 15650. All rights reserved. __KMT_KM4X_COVER_EN_Covers_EN_in.indd 3 9/1/16 2:05 PM