Модульные инструментальные системы линейки KM4X Kennametal 2017 - страница 121

Предыдущая страница Следующая страница

Навигация

Technical Manual Instructions (6.2 Installation — continued) Lockrod Drawbar 4. Thread the lockrod on to the extended drawbar. The end of the lockrod should extend distance “B” beyond the spindle gage face. Distance “B” Technical Manual System Size Min (mm) Max (mm) KM4X63 0,9 1,1 KM4X100 1,1 1,3 KM4X125 1,4 1,6 B Lockrod Set Screw 5. Move the drawbar to the “clamped without tool” position and verify that the end of stroke position is achieved, then check distance “C”. Move the drawbar to the “tool release position” again before Lockrod proceeding to the next step. Drawbar Distance “C” System Size Min (mm) Max (mm) KM4X63 8,4 8,6 KM4X100 11,7 11,9 KM4X125 14,7 14,9 C Lockrod Set Screw 6. Install the canister seals, and apply Kluber Paste ME 31–52 grease to the seals, the canister’s ball track holes and all internal surfaces of the canister. Ball Tracks Seals kennametal.com C21 KMT_KM4X_Catalog_C020_C021_EN.indd 21 L V i KMT KM4X C l C020 C021 EN A 31 2016 9/1/16 5 34 PM2:03 PM