Общий каталог Tungaloy 2020 - 2021 - страница 525

Предыдущая страница Следующая страница

Навигация

How to install and remove the blade and insert B

Assembly

❶Remove all 4 screws and ensure the O rings❷Place the blade and tighten 2
are all in place.bottom clamping screws.C
❸Place the insert in the pocket and tighten❹Place the long screw in theD

the fixing screw in the center. angular direction and tighten to clamp the insert. E Please follow the installation order as shown above.

When the screws are tightened in the ❹→❸ order, the insert clamping may be insuffi cient and unstable.

Disassembly F

❶ First loosen the long screw in the ❷ Loosen the Fixing screw in the

angular direction. center and remove the insert. G Loosing the long screw alone may not release the insert. Long diagonal screw

Plug Screw SRM6X20-XT

PLUGG1/8ISO1179Wrench: HW5.0H
Wrench: HW5.0（）
O-ring
Long diagonal screwOR5X1N
SRM6X20-XT
Wrench: HW5.0Plug screw for oil hole
（） SRM4X8ISO14580I

（Wrench: T-20/5） O-ring OR5X1N Center screw Center screw SRM6X12DIN6912

（Wrench: HW5.0） SRM6X12DIN6912 （Wrench: HW5.0） J Short bottom screws Short bottom screws SRM5-04451 SRM5-04451 Wrench: T-20/5 （Wrench: T-20/5） All parts listed here are included in the tool holder. K

L

M