NegativePositivePCD / CBN DX110 DX120 No. of corners Sharp edge D1 Rake angle C : Continuous cutting PCD Insert L : Light interrupted cuttingH : Heavy interrupted cutting Negative type P Steel LE RE with rake M Stainless K Cast iron N Non-ferrous CL CL S Superalloy H Hard material IC S Dimension (mm) Honing Shape Designation LE RE IC S D1 CNMN**-DIA CNMM120402-DIA 䖃 1 3.5 0.2 12.7 4.76 5.16 䚽 䚽 CNMM120404-DIA 䖃 1 3.5 0.4 12.7 4.76 5.16 䚽 䚽 1QP-CNMM120402 䖃 1 2.8 0.2 12.7 4.76 5.16 䚽 䚽 1QP-CNMM120404 䖃 1 2.8 0.4 12.7 4.76 5.16 䚽 䚽 DNMM**-DIA DNMM150402-DIA 䖃 1 3.3 0.2 12.7 4.76 5.16 䚽 䚽 DNMM150404-DIA 䖃 1 3.1 0.4 12.7 4.76 5.16 䚽 䚽 TNMM**-DIA TNMM160402-DIA 䖃 1 3.3 0.2 9.528 4.76 3.81 䚽 䚽 TNMM160404-DIA 䖃 1 3.2 0.4 9.528 4.76 3.81 䚽 䚽 1QP-TNMM160402 䖃 1 2.7 0.2 9.528 4.76 3.81 䚽 䚽 1QP-TNMM160404 䖃 1 2.6 0.4 9.528 4.76 3.81 䚽 䚽 C VNMM**-DIA VNMM160402-DIA 䖃 1 4.8 0.2 9.528 4.76 3.81 䚽 䚽 VNMM160404-DIA 䖃 1 4.4 0.4 9.528 4.76 3.81 䚽 䚽 VNMM160408-DIA 䖃 1 3.6 0.8 9.528 4.76 3.81 䚽 䚽 D G 䖃㻌: Line up R S T V W Y OTHERS Reference pages: External toolholder → C016 - Internal toolholder → D021 - J-Series toolholder → G044 TungCap → K008 - PINZBOHR® → K180 - Cartridge → K199 - B192 www.tungaloy.com