CWN- CWXCWN- WFHFCWM WFHF 3.2HBHHBH 3.2 WB BH BH WF 5.7 GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingMiniature toolMilling cutterEndmillDrilling toolTooling SystemUser's GuideIndex JSXXR/L A Parting toolholder, for Swiss lathes B LF LH Right hand (R) shown. C Designation CWN CWX H B LF** LH** HF WF HBL** HBH Insert Torque* JSXXR/L1010X09 1 2 10 10 120 19.65 10 0.2 19 3 JX*G06...,12...,16...,20... 1.2 JSXXR/L1212F09 1 2 12 12 85 19.65 12 0.2 19 1.5 JX*G06...,12...,16...,20... 1.2JSXXR/L1212X0912121212019.65120.2191.5JX*G06...,12...,16...,20...1.2JSXXR/L1616X0912161612019.65160.2--JX*G06...,12...,16...,20...1.2D JSXXR/L2020H09 1 2 20 20 100 22.5 20 0.2 - - JX*G06...,12...,16...,20... 1.2 *Torque: Recommended torque (N∙m) for clamping **LF (Functional Length) LH (Head Length), and HBL (Head-bottom Offset Length) values shown above are true with JXPG16... insert. LF, LH, and HBL will all be 2 mm shorter thanthe above values with JX*G12... and JXPG20...inserts, and 4 mm shorter for JXPG06... insert.Note: Use the right-hand insert (JX*G**R...) for a right-hand holder (JSXXR...); the left-hand insert(JX*G**L...) for a left-hand holder (JSXXL...).E SPARE PARTS Designation Clamping screw Wrench JSXXR... CSTC-4L100DL T-1008/5JSXXL...CSTC-4L100DRT-1008/5 F JSXXR/L-SPartingtoolholder, for Swiss lathes (for sub spindle) G LH LF H Right-hand Left-hand LH Designation CWN CWM H B LF** LH** HF WF HBH Insert Torque* I JSXXR/L1010X09-S 1 2 10 10 120 26 10 0.2/5.5 3 JX*G06...,12...,16... 1.2 JSXXR/L1212F09-S 1 2 12 12 85 26 12 0.2/5.5 1.5 JX*G06...,12...,16... 1.2 JSXXR/L1212X09-S 1 2 12 12 120 30 12 0.2/5.5 1.5 JX*G06...,12...,16... 1.2JSXXR/L1616X09-S12161612030160.2/5.5-JX*G06...,12...,16...,20...1.2*Torque: Recommended torque (N∙m) for clampingJ **LF (Functional Length) and LH (Head Length) values shown above are true with JXPG16... insert. LF and LH will be 2 mm shorter than the above values with JX*G12... insert, and 4 mm shorter for JXPG06... insert. LF, LH, and HBL will all be 2 mm shorter with JXPG20... insert. ***JXPG20... insert will not fit. Note: Use the right-hand insert (JX*G**R...) for a right-hand holder (JSXXR...); the left-hand insert (JX*G**L...) for a left-hand holder (JSXXL...).SPARE PARTS K Designation Clamping screw Wrench JSXXR*****09-S CSTC-4L055DL T-1008/5 JSXXL*****09-S CSTC-4L055DR T-1008/5 L M Referent pages : JSXXR/L, JSXXR/L-S: Inserts → G098 - G099, Standard cutting conditions → G100 Tungaloy G093