Общий каталог Tungaloy 2020 - 2021 - страница 911

Предыдущая страница Следующая страница

Навигация

Y D E N 0 9 0 5 P D F R - D Y D E N 0 9 0 5 P D F R - W D Y D E N 0 9 0 5 P D F R - B D

INSL S INSL

S INSL S B

93 R400R400 3
2BS
BS
C
PSteel
MStainless
KCast iron
NNon-ferrous
SSuperalloysD : First choice
Hard materials: Second choice
H
PCD
DesignationAPMXW1 INSLBS S
YDEN0905PDFR-DE
7z12.4- 15.1 5.7
YDEN0905PDFR-WD-z12.44.5 15.2 5.7
YDEN0905PDFR-BD-z12.44.5 15.2 5.7

z: Line up Note: Tungaloy provides refurbishing service for these inserts upon request. 1 piece per package F STANDARD CUTTING CONDITIONS

ISOWorkpiece materialGradeDesignationCutting speed Vc (m/min)Feed per tooth fz (mm/t)
Aluminium alloy castings & die castings Si < 13%DX140YDEN0905PDFR-D500 ~ 40000.05 ~ 0.2
Aluminium alloy castings & die castings Si ≥ 13%DX140YDEN0905PDFR-D200 ~ 5000.05 ~ 0.2
Rolled aluminium alloysDX140YDEN0905PDFR-D500 ~ 40000.05 ~ 0.2
Copper alloysDX140YDEN0905PDFR-D200 ~ 5000.05 ~ 0.2

Notes: (1) When requiring improved surface fi nish, use the wiper insert together (4) Wet cutting, using a water soluble cutting fl uid, is recommended.

with regular inserts YDEN0905PDFR-WD. (5) When the length-to-diameter overhang ratio of the tool (L/D) exceeds 3, I

(2) When requiring reduced burr occurrence, use the deburring inserts reduce cutting speed and feed to 70 to 80% of the values given in the together with regular inserts YDEN0905PDFR-BD. table. (3) When using the cutter at speeds over 1500m/min, use an arbor or tool- holder balanced to within G16.

H ow to put each insert together J

For generalAccuracy of machining surface priorityBurr reduction priority
General insertYDEN0905PDFR-D
Wiper insertYDEN0905PDFR-WD--
Wiper insert for burr reduction YDEN0905PDFR-BD--

1 or 2 wiper inserts in General insert : Burr wiper insert K

Number of Inserts by type All general cutter body = 1 : 1 L R R

Specifi cation of insert setting

M

Wiper insert Wiper insert for burr reduction DC : Cutter diameter DC : Cutter diameter DC : Cutter diameter Accuracy of machining surface (roughness and undulation)

Burr of machining surface