Общий каталог Tungaloy 2020 - 2021

speed Grooving, Parting-off Profiling

ISO Workpiece material Grades V (with full

	TCS	TCM	TCS	TCS	TCM
Carbon steel

	AH725	100 - 200	0.05 - 0.15	0.05 - 0.25	0.04 - 0.12	0.05 - 0.10	0.05 - 0.15	0.5
S45C, etc. C45, etc.
Alloy steel
	AH725	50 -180	0.05 - 0.15	0.05 - 0.25	0.04 - 0.12	0.05 - 0.10	0.05 - 0.15	0.5
SCM435, etc. 34CrMo4, etc.
Stainless steel								C
	AH725	100 - 150	0.05 - 0.15	0.05 - 0.20	0.04 - 0.12	0.05 - 0.10	0.05 - 0.15	0.5
SUS304, etc. X5CrNi18-9, etc.
Grey cast iron
	AH725	50 - 180	0.05 - 0.15	0.05 - 0.25	0.04 - 0.12	0.05 - 0.10	0.05 - 0.15	0.5
FC250, etc. 250, etc.
Ductile cast iron
	AH725	50 - 120	0.05 - 0.15	0.05 - 0.20	0.04 - 0.12	0.05 - 0.10	0.05 - 0.15	0.5
FCD400, etc. 400-15, etc.
Titanium alloys								D
	AH725	30 - 60	0.05 - 0.15	0.05 - 0.15	0.04 - 0.12	0.05 - 0.10	0.05 - 0.10	0.5
Ti-6Al-4V, etc.
Superalloys
	AH725	20 - 50	0.05 - 0.15	0.05 - 0.15	0.04 - 0.12	0.05 - 0.10	0.05 - 0.10	0.5
Inconel718, etc.
								E
J STG R / L
S c re w - o n external grooving to o l h o l d e r, for Swiss lathes

	Designation CWN CWX		H	B	LF	LH	HF	WF	HBH	Insert	Torque*
JSTGR/L1010X3	0.33	3	10	10	120	18.5	10	10	2	JTGR/L3...	1.2
JSTGR/L1212F3	0.33	3	12	12	85	18.5	12	12	-	JTGR/L3...	1.2
JSTGR/L1212X3	0.33	3	12	12	120	18.5	12	12	-	JTGR/L3...	1.2	H
JSTGR/L1616X3	0.33	3	16	16	120	18.5	16	16	-	JTGR/L3...	1.2
JSTGL1616K3	0.33	3	16	16	125	18.5	16	16	-	JTGR/L3...	1.2
*Torque: Recommended torque (N∙m) for clamping
SPARE PARTS												I
					Wrench 2

J J S -TG L 3 S c re w - o n external grooving to o l h o l d e r, for Swiss lathes LF K

Left-hand (L) shown. L

Note: Use left-hand toolholders (L) with right-hand inserts (R). *Torque: Recommended torque (N∙m) for clamping

Reference pages :JSTGR/L, JS-TGL3: Inserts → G080 - G081,

Designation	Clamping screw		Wrench
JS**-TGL3		CSTB-4S	T-15F	Standard cutting conditions → G081