Общий каталог Tungaloy 2020 - 2021 - страница 935

Q C system for TAC Mills

TAC mills QC system facilitate easy and quick mounting of the cutter body (face milling cutter, etc.) to the machine tools. B

Small dia. TAC mills QC system Dia. ø80 ~ 160

Type A QC system

Features C

• Cutter body replacement is possible without removing the bolt.
• A QC system is made up only by installing the Type A set bolt to our standard arbor. (The

Machine spindle cutter body is made to A-Type mounting specifi cation.)

• Standard arbor used ensures superior economy and rigidity.

Standard arbor Type A set bolt (QAB---) Replacement method

Mounting - Direct the set bolt direction to align with the cutter spot facing hole, then D

Cutter body mount the cutter. Turn the set bolt one to two turns for tightening. (with A-Type mounting Removal - Loosen the bolt one turn, press the cutter to the spindle, and turn the set bolt specifi cation) one to two turns. The cutter can now be removed.

A-type QC Mounting System for Small Diameter TAC Mills E

Dimensional details of mount Arbors

(For ø80 to ø160 dia. TAC mills) Standard arbors (FMA, FMC type) can’t be used. Special arbors applicable for bellow

dimensions can be made to order on request.

DCONMS

KWW F

K KWW

LCS 70

Type B QC system Features

• Cutter body replacement is possible without removing the bolt.
• Loosening of the adapter is not enough to remove the cutter. This is to prevent the

Machine spindle cutter from falling. I

• Type B QC adapter and Type B cutter installation are necessary.

Type B adapter It is not necessary to set the set bolt direction with that of the cutter hole. The cutter is fi t into the adapter only by aligning the match marks. Cutter body (with B-Type mounting specifi cation) Replacement method

Mounting - Set the cutter into the adapter. Direct the cutter match mark to align with that

of adapter, then the cutter enters the adapter. Turn the cutter by 90˚ and turn J

adapter bolt one to two turns for tightening.

Removal - Loosen adapter bolt by one or two turns and turn the cutter by 90˚. The cutter

can now be removed.

B-type QC Mounting System for Small Diameter TAC Mills K

Dimensional details of mount Dimensional details of B-type adapters (For ø80 to ø160 dia. TAC mills) Instead of the above B-type KWW adapters, BT- and T-type arbors can 15 LB 13 be also used for B-type QC mount

DBC

KWW DCONMS cutters. These arbors are made to

55° DBC order on request. L

10 35° 45° b C

MAS/BT

B-type mountingB形取付仕様 M

Cutter dia. Dimensions (mm) Cutter dia. Dimensions (mm)