WFHFWFHF BHBH GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingMiniature toolMilling cutterEndmillDrilling toolTooling SystemUser's GuideIndex JSWL2XR/L A Screw-on toolholder with 95° approach angle, for WXGU inserts 95° LH Without offset B LF 95° Cutting edge style L2 Right hand (R) shown. C Designation H B LF LH HF WF RE** Insert Torque* JSWL2XR/L1010X04 10 10 120 11 10 0 0.2 WXGU0403**L/R... 0.9 JSWL2XR/L1212F04 12 12 85 11 12 0 0.2 WXGU0403**L/R... 0.9 JSWL2XR/L1212X04 12 12 120 11 12JSWL2XR/L1616X0416161201316JSWL2XR/L2020H04202010013200000.2WXGU0403**L/R...0.90.2WXGU0403**L/R...0.90.2WXGU0403**L/R...0.9D *Torque: Recommended torque (N∙m) for clamping **RE: Standard corner radius Note: Use right-hand toolholders (R) with left-hand inserts (L); and left-hand toolholders (L) with right-hand inserts (R). SPARE PARTSDesignation Clamping screw WrenchJSWL2XR/L...SR34-514T-7F E JPWL2XR/LLever-locktoolholder with 95° approach angle, for WXGU inserts F 95° Without offset 95° LH LF G Cutting edge style L2Designation HJPWL2XR/L1010X0410 B10 LF120 LH11 HF10 WF0 Right hand (R) shown.RE**InsertTorque*0.2WXGU0403**L/R...0.9H JPWL2XR/L1212F04 12 12 85 11 12 0 0.2 WXGU0403**L/R... 0.9 JPWL2XR/L1212X04 12 12 120 11 12 0 0.2 WXGU0403**L/R... 0.9 JPWL2XR/L1616X04 16 16 120 13 16 0 0.2 WXGU0403**L/R... 0.9*Torque: Recommended torque (N∙m) for clamping **RE: Standard corner radiusNote: Use right-hand toolholders (R) with left-hand inserts (L); and left-hand toolholders (L) with right-hand inserts (R).I SPARE PARTS Designation Lever Pin Clamping screw Wrench JPWL2XR/L... SLLV-2 SL-PI-2 SR10400611 HW2.0/5REDINSERT SELECTION J For Swiss lathes Applicationareas Finish cutting Medium to finishcutting Applicationareas Finish cutting Medium to finishcuttingGradeSH725SH725GradeSH725SH725JSSJSJSSJSBreakerBreaker K Shape Shape Cutting conditions G053 Cutting conditions G053 For Small CNC lathesApplicationareasFinish cuttingMedium cutting Applicationareas Finish cutting Medium cutting L Grade AH725 AH725 Grade AH8015 AH8015 SS TS SS TS Breaker Breaker Shape Shape Cutting conditions G053 Cutting conditions G053 M Reference pages :JSWL2XR/L, JPWL2XR/L: Inserts → B158 -, Standard cutting conditions → G054 Tungaloy G017