Общий каталог Tungaloy 2020 - 2021 - страница 46

Предыдущая страница Следующая страница

Навигация

Superalloys and titanium

Chipbreaker System for Turning (Negative type)

7

AH8015 AH8015

6 HRF AH8005

AH8005 5 4 HRM M714B

3 BX480

2

1 T-CBN

0

0.1 0.2 0.3 0.4 0.5 0.6 0.7

Feed: f (mm/rev)

Titanium alloy Ni-base alloy

400 400

300 300

200 200 BX480 BX480 M714B

100AH8005100
AH8005
AH8015AH8015
0.20.40.60.80.20.40.60.8
Feed: f (mm/rev)Feed: f (mm/rev)
ChipbreakerShapeFeatureChipbreakerShapeFeature
Suitable for fi nishing superalloy.Excellent performance in fi nishing
Unique protrusion improves chipNo of heat-resistant alloy and titanium
HRFcontrol in cutting low depth.chip-alloy with CBN sintered body on the

breaker cutting edge. (T-CBN) First choice for heat-resistant alloy.

The geometry optimized for a wide HRM range of depths of cut.

STANDARD CUTTING CONDITIONS

ISOOperationWork conditionChip-GradeDepth of cutFeedCutting speed:Vc (m/min)
breakerap (mm)f (mm/rev)Titanium alloyNi-base alloy
CtiWithoutBX4800.1 - 0.50.05 - 0.2100 - 20070 - 300
PrecisiononnuousWithoutM714B0.1 - 0.50.05 - 0.2-70 - 400
finishingLight interruptedWithoutBX4800.1 - 0.50.05 - 0.2100 - 200-
ContinuousHRFAH80050.5 - 1.50.05 - 0.2520 - 10020 - 100
Finishing to medium cuttingLight interruptedHRFAH80150.5 - 1.50.05 - 0.2520 - 8020 - 50
Heavy interruptedHRFAH80150.5 - 1.50.05 - 0.2510 - 6010 - 40
ContinuousHRMAH80050.5 - 40.1 - 0.420 - 10020 - 100
Medium cuttingLight interruptedHRMAH80150.5 - 40.1 - 0.420 - 8020 - 50
Heavy interruptedHRMAH80150.5 - 40.1 - 0.410 - 6010 - 40

Ni-base alloy: INCONEL718, etc. Titanium alloy: Ti-6Al-4V, etc.