Общий каталог Tungaloy 2020 - 2021 - страница 905

Предыдущая страница Следующая страница

Навигация

Y D E N 0 6 0 3 P D ( F / S ) R - D Y D E N 0 6 0 3 P D F R - W D B

INSL S INSL S

LE R200 R400 C Y D E N 0 6 0 3 P D F R - B D D

INSL S

R400 E

P Steel M Stainless

KCast ironF
NNon-ferrous
SSuperalloys: First choice
Hard materials: Second choice
H
PCD

APMX Edge W1 INSL S

DesignationBSLEG
prep.
YDEN0603PDFR-D4.5Without z9.512.73.12.26.5
YDEN0603PDSR-D4.5Withz9.512.73.12.26.5
YDEN0603PDFR-WD-Without z9.212.83.14.5-H
YDEN0603PDFR-BD-Withz9.212.93.14-

Note: Tungaloy provides refurbishing service for these inserts upon request. z: Line up 1 piece per package I STANDARD CUTTING CONDITIONS

ISOWorkpiece materialGradeDesignationCutting speed Vc (m/min)Feed per tooth fz (mm/t)
Cast aluminum alloy / Die-cast Si < 13%DX110YDEN0603PDFR-D500 - 4,0000.05 - 0.20
Cast aluminum alloy / Die-cast Si>13%DX110YDEN0603PDFR-D200 - 8000.05 - 0.20
Aluminum alloyDX110YDEN0603PDFR-D500 - 4,0000.05 - 0.20
Copper alloyDX110YDEN0603PDFR-D200 - 5000.05 - 0.20

- The values in the above list are of standard recommendations and may require adjustments in consideration L with cutting depths and/or workpiece/machine rigidity. - Use wiper inserts (-WD) for better surface requirements and deburring inserts (-BD) to remove burrs. - Always use wet cutting (emulsion coolant) for machining aluminum or copper alloys.

M