SolidIndexableThreadingMiling EndmillEndmillEndmillInsert DCe8 DCSFMS VRD**-06... Radius head with 6 ground flutes (TungMeister) 7° CRKS R ≤ 9° RE APMX LF APMX = Max. depth of cut CRKS = Connection screw size Designation AH725 NOF FHA DC DCSFMS APMX RE CRKS LF Wrench Torque* VRD080L04.0R20-06S05 z 6 30º 8 7.7 4 2 S05 10 KEYV-S05 7 VRD100L05.0R30-06S06 z 6 30º 10 9.7 5 3 S06 13 KEYV-S06 10 VRD120L07.0R40-06S08 z 6 30º 12 11.7 7 4 S08 16.5 KEYV-S08 15 VRD160L09.0R50-06S10 z 6 30º 16 15.3 9 5 S10 20.5 KEYV-S10 28 z: Line up * Recommended clamping torque(N·m) Square 2 pieces per package R Radius S TA N D A R D CUTTING CONDITIONS Ball Shoulder milling (VEH, VEE: 3 flutes, VED/VEE: 4 flutes, VEE-A, VEE-I, VEE-R, VEE-C, VRB, VRC, VRD) chamfering ISOSlotting Workpiece material Hnaersds-VcCs(upmtet/eimndgin) 6 Feed per tooth: fz (mm/t)Tool diameter: DC (mm) Depth of cut a p (mm) Pick feed Pf (mm)81012162025 Others Low carbon steelsS45C, S55C, etc.C45, C55, etc.- 300 HB80 - 180 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC High carbon steelsSCM440, SCr415, etc.42CrMo4, 15Cr3, etc.- 300 HB60 - 1400.03 -0.05 -0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC Prehardened steelPX5, NAK80, etc.30 - 40HRC60 - 120 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC 3 Stainless steelsSUS304, SUS316, etc.- 200 HB40 - 100X5CrNi18-9, X5CrNiMo17-12-2, etc.0.03 -0.05 -0.07 -0.08 -0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC 4 Grey cast ironsFC250, FC300, etc.250, 300, etc.150 - 250HB80 - 2000.03 -0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC Ductile cast ironsFCD400, etc.400-15S, etc.150 - 250HB80 - 200 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC Aluminium alloysSi < 13% - 200 - 700 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC or more Aluminium alloysSi *13% - 100 - 300 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.25 x DC Titanium alloysTi-6Al-4V, etc. - 40 - 80 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.05 x DC Heat-resistant alloysInconel 718, etc.- 20 - 40 0.03 - 0.05 - 0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.05 x DC Hardened steelSKD61, SKT4, etc.X40CrMoV5 1, 55NiCrMoV6, etc.40 - 50HRC40 - 800.03 -0.05 -0.07 -0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.05 x DC Hardened steelSKD11, SKH, etc.X153CrMoV12, HS18-0-1, etc.50 - 60HRC20 - 600.03 -0.05 -0.07 - 0.08 - 0.09 -0.070.090.120.130.150.1 -0.170.1 -0.6 x0.17DC0.05 x DC I070 www.tungaloy.com