Общий каталог Tungaloy 2020 - 2021 - страница 1629

Предыдущая страница Следующая страница

Навигация

GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingMiniature toolMilling cutterEndmillDrilling toolTooling SystemUser's GuideIndex User’s Guide - Technical Reference A Grooving and Parting To o l s How to install and remove the blade and insert᭹Assembly B 1 Remove all 4 screws and ensure 2 Place the blade and tighten the O rings are all in place. 2 bottom clamping screws. C 3 Place the insert in the pocket and 4tighten the fixing screw in thePlace the long screw in theangular directionandD center. tighten to clamp the insert. Please follow the installation order as shown above. When the screws are tightened in E the ❹→❸ order, the insert clamping may be insufficient and unstable. ᭹Disassembly 1 First loosen the long screw in 2the angular direction.Loosen the Fixing screw inthe center and remove the F insert. Loosing the long screw alone may not release the insert. G Plug ScrewPLUG G1/8ISO1179(Wrench: HW5.0) Long diagonal screwSRM6X20-XT(Wrench: HW5.0)O-ring H Long diagonal screw OR5X1N SR M6X20-XT(Wrench: HW5.0)O-ringOR5X1N Plug screw for oil holeSRM4X8ISO14580(Wrench: HW5.0)Center screwI Center screwSR M6X12DIN6912 SRM6X12DIN6912(Wrench: HW5.0) (Wrench: HW5.0)Short bottom screws Short bottom screws J SR M5-04451 SRM5-04451 (Wrench: T-20/5) (Wrench: T-20/5) ※ All parts listed here are included in the tool holder.PROCEDURETOCLAMPANDUNCLAMPINSERT K 1 Put the insert in the 2 Turn the wrench and 3 Unclamp pocket push the insert into the pocket to clamp L M Tungaloy L041