Общий каталог Tungaloy 2020 - 2021 - страница 1334

Deep Hole Drill Indexable Drill 2-effective Drill GUIDE PA D
G P 0 4 , 0 5 , 0 6 , 07, 0 8
RE

W1
S
INSL
P Steel 
M Stainless 
K Cast iron 
N Non-ferrous 
S Superalloys  : First choice
H Hard materials    : Second choice
Coated

FH3135
Designation DCN DCX W1 INSL S RE
F1122
F2122

GP04-055 12 13.99 z z 4 16 2 5.5
GP04-16-055-DC 12 13.99 z 4 16 2 5.5
GP05-060 14 15.99 z z 5 18 2.5 6
GP05-18-060-DC 14 15.99 z 5 18 2.5 6
GP05-075 16 18 z z 5 18 2.5 7.5
GP05-18-075-DC 16 18 z 5 18 2.5 7.5
GP06-085 18.01 21 z z 6 20 3 8.5
GP06-20-085-DC 18.01 21 z 6 20 3 8.5
GP06-100 21.01 25 z z 6 20 3 10
GP06-20-100-DC 21.01 25 z 6 20 3 10
GP06 25.01 33 z z 6 20 3 12
GP06-20-120-DC 25.01 33 z 6 20 3 12
GP07 33.01 38 z z 7 20 3.5 12
GP07-20-120-DC 33.01 38 z 7 20 3.5 12
GP08 38.01 40 z z 8 25 4.5 15.5
GP08-25-155-DC 38.01 40 z 8 25 4.5 15.5
䖃: Line - up
Package quantity = 5 pcs.
R EPL ACING GUIDE PA DS
Guide pads are subject to wear, like inserts
- The guide pad has two corners.
- Each guide pad can be used on two sides. When the first corner wears out a 70% of Wear on the 1st corner
Drilling direction 70%
the width, reverse the guide pad to use the second corner.
100%

- Replace with a new guide pad when the second corner wears out.
For higher wear resistance
Wear - High wear-resistant grade
resistance
First recommendation
- Suitable for various workpiece materials Reverse and use
F1122 - Long tool life due to unique substrate and coating the 2nd corner
Drilling direction
F2122 For higher fracture resistance
FH3135 - High fracture-resistant grade
Fracture resistance
S H IM
S H I M S E T- G P 0 4 S H I M S E T- G P 0 5 S H I M S E T- G P 0 6

W


W


 
H H
L H
L L
Designation DC W L H
SHIMSET-GP04 12 - 13.99 4 16 0.01 - 0.05
Note: Shim thickness: 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm
SHIMSET-GP05 14 - 18 5 18 0.01 - 0.05 Package quantity = 5 pcs. (1pc per each thickness)
SHIMSET-GP06 18.01 - 33 5 18 0.01 - 0.05 Note: Shim sheets are sold as set.
Shim sheet combinations by adjusting diameter
Guide pad of diameter side
Adjustment diameter Shim thickness in guide pad Shim thickness in guide pad Required number of shim set
of diameter side. of bearing side.
+0.01 0.01 - 1
+0.02 0.02 0.01 1
+0.03 0.03 0.01 + 0.02 1
+0.04 0.04 0.01 + 0.03 1
+0.05 0.05 0.02 + 0.03 1
+0.06 0.01 + 0.05 0.02 + 0.04 1
+0.07 0.02 + 0.05 0.03 + 0.04 1
+0.08 0.03 + 0.05 0.04 + 0.04 2
+0.09 0.04 + 0.05 0.04 + 0.05 2
+0.1 0.05 + 0.05 0.04 + 0.04 + 0.02 2 Guide pad of bearing side
J108 www.tungaloy.com