Общий каталог Tungaloy 2020 - 2021 - страница 1579

Предыдущая страница Следующая страница

Навигация

WF WF BBH H GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingMiniature toolMilling cutterEndmillDrilling toolTooling SystemUser's GuideIndex CP CTTP-CA A Clamp-on cartridge, with 30° approach angle, for 11° clearance triangular inserts 30° Chamfering t 20° DMIN B 30˚Cutting edge style T 45°16CAHF 10CA, GAMFGAMRPE LHLF e112CA L3 DMIN2(Mounting angle)Right hand (R) shown. C Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert CTTPR/L10CA-11 40 55 0.4 9 50 18 10 14.5 10 20 8 0° 0° 5 TP**1103... CTTPR12CA-16 50 75 0.8 13 55 22 12 19.5 15 20 8 4° 0° 6 TP**1603...CTTPL16CA55750.81563231616172580°0°0TP**1603...• In the above table, DMIN is the minimum bore diameter for axial mounting, and DMIN2 is for radial mounting.D • When using a right or left hand insert, use right-hand cartridges (R) with left-hand inserts (L); and left-hand cartridges (L) with right-hand inserts (R). • **RE: Standard corner radius SPARE PARTSDesignation Cartridge setting screw Sizing plate 1 Sizing plate 2 Wrench 1 Wrench 2 Wrench 3 E CTTPL10CA-11 CHHM6-15 - - P-2 P-2.5 P-5 CTTPR/L12CA-16 CHHM6-25 - - P-2 P-3 P-5 CTTPL16CA BHM8-25U S0816B S1016B P-2.5 P-4 - Designation Shim Shim screw Clamping screw Axial adjustingscrew Radial adjustingscrewSizing plate ass’y(Optional parts)Chipbreaker piece F CTTPR/L10CA-11 - - CSG-5 (CSG-5S) ASM54 SSHM4-10 PSTR/L10 CBT-2M CTTPR12-16 - - CSG-6 (CSG-6S) ASM54 SSHM4-14 PSTR12 CBT-3M CTTPL10CA PAT-32 SM3X0.5X8 CSG-8S ASM6 SSHM5-16 - - G CE CTTE-CA Clamp-on cartridge, with 30° approach angle, for 20° clearance triangular inserts 30° Chamfering t 20°DMIN H 30˚ HF GAMFGAMP RE LH e1 L3 DMIN2 Cutting edge style T LF Right hand (R) shown. I Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert CTTER10CA-11 40 55 0.4 9 50 14 10 14.5 10 20 8 10° 0° 5 TE**1103... CTTER12CA-16 50 75 0.8 13 55 18 12 19.5 15 20 8 10° 0° 6 TE**1603...• In the above table, DMIN is the minimum bore diameter for axial mounting, and DMIN2 is for radial mounting.• When using a right or left hand insert, use right-hand cartridges (R) with left-hand inserts (L); and left-hand cartridges (L) with right-hand inserts (R).J • **RE: Standard corner radius SPARE PARTSDesignation Cartridge setting screw Wrench 1 Wrench 2 Wrench 3CTTER10CA-11CHHM6-15P-2P-2.5P-5 K CTTER12CA-16 CHHM6-25 P-2 P-3 P-5 Designation Clamping screw Axial adjustingscrew Radial adjustingscrewChipbreaker piece Sizing plate ass’y(Optional parts)CTTER10CA-11CSW-40ASM54SSHM4-8CBT-2MPSTR10 L CTTER12CA-16 CSW-50 ASM54 SSHM4-14 CBT-3M PSTR12 M Reference pages: CP CTTP-CA: Inserts → B142 -, CBN → B185 -, PCD → B196 CE CTTE-CA: Inserts → Special Tungaloy K205