Общий каталог Tungaloy 2020 - 2021 - страница 1159

Предыдущая страница Следующая страница

Навигация

Body

Designation①Cartridge screw②Shim plate②Shim plate②Shim plate②Shim plateWrench for cartridge③Washer
TCB260-290F32CM3×0.5×6AP16050AP16100AP16150P-2.53.2X6X0.5
TCB300-340F32CM3×0.5×6AP16050AP16100AP16150AP16200P-2.53.2X6X0.5
TCB350-390F32CM3×0.5×6AP16050AP16100AP16150AP16200P-2.53.2X6X0.5
TCB400-440F32CM4×0.7×10AP21050AP21100AP21150AP21200P-34.3X8X0.5
TCB450-490F32CM4×0.7×10AP21050AP21100AP21150AP21200P-34.3X8X0.5
TCB500-540F32CM4×0.7×10AP21050AP21100AP21150AP21200P-34.3X8X0.5
TCB550-590F32CM4×0.7×10AP21050AP21100AP21150AP21200P-34.3X8X0.5

TCB500-540F32 CM4×0.7×10 AP21050 AP21100 AP21150 AP21200 P-3 4.3X8X0.5 C

Cartridge set SPARE PARTS

Designation④Insert screwWrench
TCB04CA-26-29CSTA-NO3T-9D
TCB32CA-30-39CSTA-NO5T-9D①
TCB32CA-30-39CSTA-NO5T-9D
TCB43CA-40-59CSTA-4T-15D③
TCB43CA-40-59CSTA-4T-15D④
TCB43CA-40-59CSTA-4T-15D
TCB43CA-40-59CSTA-4T-15D②

* Recommended clamping torque: CSTA-NO3 / CSTA-NO5=2.3, CSTA-4=3.5

SPARE PARTS

DesignationThickness
AP160050.05
AP160200.2
AP210050.05
AP210200.2

AP21005 0.05 G

Cautions in preparing the cartridge type cutter - Firmly press the cartridge in the arrowed direction while tightening the screw to install the cartridge on the cutter body. (Fig.1) - Ensure that the shim plates thickness are always the same on both sides to H

equalize the tool diameter.

- Ensure to locate the shim plate fit within the cartridge pocket. (Fig.2)

- Use thin shim plates (not included) for fine diameter adjustments in ø0.1 mm

increments.Fig.1Fig.2
Cartridge
- When using multiple shim plates in one pocket for a diameter adjustment,Fine adjustmentShim platespocket
always use the thinest shim plates at the bottom to prevent them from dislo-shim plate
cating during machining. (Fig.3)I
- Ensure that the top shim is always in contact with the rim of the cartridge
pocket to prevent it from dislocation during machining. (Fig.4)

Fig.3 Fig.4 J

C U S TO M - B U I LT TOOL SERVICE Tungaloy also designs and fabricates semi-standard or tailor-made tools with the TCB inserts according to the desired tool specifications. Contact your Tungaloy representative for further details. K

L

M