Общий каталог Tungaloy 2020 - 2021 - страница 1007

Предыдущая страница Следующая страница

Навигация

ISOWorkpieceGradesRou (Depth of cughing t: > 1.5 mm)Finis (Depth of cut:hing 0.3 ~ 0.7 mm)
materialCutting speed Vc (m/min)Feed per tooth fz (mm/t)Cutting speed Vc (m/min)Feed per tooth fz (mm/t)
Mild steelsAH3135130 ~ 2300.1 ~ 0.2150 ~ 2500.1 ~ 0.23
Unhardened steelsT3225130 ~ 3000.1 ~ 0.23180 ~ 3000.1 ~ 0.25
< 180 HBNS740130 ~ 2000.1 ~ 0.18150 ~ 2500.1 ~ 0.2
Carbon steelsAH3135100 ~ 2000.1 ~ 0.18130 ~ 2300.1 ~ 0.2
Alloy steelsT3225130 ~ 2800.1 ~ 0.2180 ~ 2800.1 ~ 0.23
< 300 HBNS740100 ~ 1500.1 ~ 0.15150 ~ 2000.1 ~ 0.18
Die steelsT3225100 ~ 2500.1 ~ 0.15100 ~ 2500.1 ~ 0.2
< 30 HRCAH3135100 ~ 1500.1 ~ 0.15100 ~ 1500.1 ~ 0.2
Stainless steelsAH313580 ~ 1800.1 ~ 0.2100 ~ 2000.1 ~ 0.25
< 250 HBT3225150 ~ 2000.1 ~ 0.18200 ~ 2500.1 ~ 0.25
Cast ironsT1215100 ~ 2500.1 ~ 0.2100 ~ 2500.1 ~ 0.25
Ductile cast ironAH120100 ~ 2000.1 ~ 0.2100 ~ 2000.1 ~ 0.25
Aluminium alloysTH10200 ~ 10000.05 ~ 0.25350 ~ 10000.1 ~ 0.25
Si < 13%DX140200 ~ 10000.05 ~ 0.15350 ~ 10000.1 ~ 0.2
Copper alloysTH10200 ~ 5000.1 ~ 0.15200 ~ 5000.1 ~ 0.2
Titanium alloys Ti-6Al-4V, etc.AH13020 ~ 600.05 ~ 0.1520 ~ 600.05 ~ 0.15
Heat-resistant alloys Inconel 718, etc.AH12020 ~ 400.05 ~ 0.120 ~ 400.05 ~ 0.1

AH120 20 ~ 40 0.05 ~ 0.1 20 ~ 40 0.05 ~ 0.1 G

Note:

  • Dry cutting is recommended except for aluminium alloys
  • Maximum depth of cut for DX140 TECN43ZFR-DIA is 3.5 mm. H

I

J

K

L

M