Оптимальный выбор Kennametal 2025 - 2026 - страница 274

Предыдущая страница Следующая страница

Навигация

HIGH PERFORMANCE MAXIMET AND KENCUT ALUMINUM APPLICATION DATA MaxiMet ABDE MaxiMet ABDF MaxiMet ABDE-ABDF • Application Data Feed per Tooth — Fz information is for side milling (A). K600 For slotting (B), reduce Fz by 20%. Material Group Cutting Speed — Vc A B D1 — Diameter m/min ap ae ap min max mm 1,5 2,0 3,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0 1 1,5 x D 0,5 x D 1,0 x D 500 2000 Fz 0,014 0,018 0,027 0,036 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180 0,225 2 1,5 x D 0,5 x D 1,0 x D 500 1500 Fz 0,012 0,016 0,024 0,032 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162 0,203 N 3 1,5 x D 0,5 x D 1,0 x D 500 1500 Fz 0,009 0,013 0,019 0,025 0,038 0,050 0,063 0,076 0,088 0,101 0,113 0,126 0,158 4 1,5 x D 0,5 x D 1,0 x D 400 750 Fz 0,009 0,013 0,019 0,025 0,038 0,050 0,063 0,076 0,088 0,101 0,113 0,126 0,158 5 1,5 x D 0,5 x D 1,0 x D 250 1000 Fz 0,012 0,016 0,024 0,032 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162 0,203 MaxiMet SOLID END MILLING ABDE • Necked • Application Data Feed per Tooth — Fz information is for side milling (A). K600 For slotting (B), reduce Fz by 20%. Material Group Cutting Speed — Vc A B D1 — Diameter m/min ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0 1 1xD 0,5 x D 1,0 x D 500 2000 Fz 0,060 0,080 0,100 0,120 0,160 0,200 2 1xD 0,5 x D 1,0 x D 500 1500 Fz 0,054 0,072 0,090 0,108 0,144 0,180 N 3 1xD 0,5 x D 1,0 x D 500 1500 Fz 0,042 0,056 0,070 0,084 0,112 0,140 4 1xD 0,5 x D 1,0 x D 400 750 Fz 0,042 0,056 0,070 0,084 0,112 0,140 5 1xD 0,5 x D 1,0 x D 250 1000 Fz 0,054 0,072 0,090 0,108 0,144 0,180 NOTE: These guidelines may require variations to achieve optimum results. For better surface finish, reduce feed per tooth. For cutting aluminum with high silicon, TiCN coating is recommended. Ap for milling machine with ceramic bearings spindle, multiply by 0,5. Above parameters are based on ideal conditions. For smaller taper machining centers, please adjust parameters accordingly on >12mm diameter. For tools with reach >3xD, reduce Fz by 20%. For tools with reach >5xD, reduce Fz by 30%. For tools with reach >10xD, reduce Vc and Fz by 30%. C57 kennametal.com