Каталог Sumitomo монолитные фрезы - страница 97
Навигация
Каталог Sumitomo инструмент для отрезки
Каталог Sumitomo токарные резцы (державки) для наружного точения
Общий каталог Sumitomo 2012
Каталог Sumitomo сплавы и режимы
Каталог Sumitomo специальные торцевые фрезы
Каталог Sumitomo фрезы со сменными пластинами- I_001
- I_1-001
- I_1-002
- I_1-003
- I_1-004
- I_1-005
- I_1-006
- I_002
- I_003
- I_004
- I_005
- I_006
- I_007
- I_008
- I_009
- I_010
- I_011
- I_012
- I_013
- I_014
- I_015
- I_016
- I_017
- I_018
- I_019
- I_020
- I_021
- I_022
- I_023
- I_024
- I_025
- I_026
- I_027
- I_028
- I_029
- I_030
- I_031
- I_032
- I_033
- I_034
- I_035
- I_036
- I_037
- I_038
- I_039
- I_040
- I_041
- I_042
- I_043
- I_044
- I_045
- I_046
- I_047
- I_048
- I_049
- I_050
- I_051
- I_052
- I_053
- I_054
- I_055
- I_056
- I_057
- I_058
- I_059
- I_060
- I_061
- I_062
- I_063
- I_064
- I_065
- I_066
- I_067
- I_068
- I_069
- I_070
- I_071
- I_072
- I_073
- I_074
- I_075
- I_076
- I_077
- I_078
- I_079
- I_080
- I_081
- I_082
- I_083
- I_084
- I_085
- I_086
- I_087
- I_088
- I_089
- I_090
- I_091
- I_092
- I_093
- I_094
- I_095
- I_096
- I_097
- I_098
- I_099
- I_100
- I_101
- I_102
- I_103
- I_104
- I_105
- I_106
- I_107
- I_108
- I_109
- I_110
- I_111
- I_112
- I_113
- I_114
- I_115
- I_116
- I_117
- I_118
- I_119
- I_120
- I_121
- I_122
- I_123
- I_124
- I_125
- I_126
- I_127
- I_128
- I_129
- I_130
- I_131
- I_132
- I_133
- I_134
- I_135
- I_136
- I_137
- I_138
- I_139
- I_140
- I_141
- I_142
- I_143
- I_144
- I_145
- I_146
あああ
あああSSEHVL Radius Endmills for Exotic Alloys Anti-vibration Type4000WS-R
■ Recommended Cutting Conditions 1. For stable machining, a more rigid machine is recommended. 2. Wet machining is recommended for stainless steel and heat resistant alloy applications. 3. If cutting noise and vibration are present, please change the cutting conditions accordingly.
- Side Milling
a DC e
| Work Material Cttin Conditions | Stainle SUS304, | ss Steel SUS316 | Titaniu | m Alloy | Heat Resi | stant Alloy |
| DC(mm) ug | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) |
| 12.0 | 1,900 | 470 | 2,000 | 600 | 930 | 160 |
| 16.0 | 1,400 | 430 | 1,500 | 500 | 700 | 140 |
| 20.0 | 1,100 | 330 | 1,200 | 260 | 560 | 110 |
| 25.0 | 890 | 270 | 950 | 290 | 450 | 90 |
| Standard ap | 1.5 | DC | 1.5 | DC | 1.5 | DC |
| Depth-of-cut ae | 0.1 | DC | 0.05 | DC | 0.05 | DC |
- Groove Milling
| Work Material Cuttin Conditions | Stainles SUS304, | s Steel SUS316 | Titaniu | m Alloy | Heat Resi | stant Alloy |
| DC(mm) g | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) |
| 12.0 | 1,600 | 200 | 1,400 | 230 | 550 | 100 |
| 16.0 | 1,200 | 130 | 1,100 | 200 | 400 | 80 |
| 20.0 | 950 | 95 | 890 | 90 | 320 | 60 |
| 25.0 | 760 | 75 | 700 | 70 | 250 | 50 |
| Standard Depth-of-cut ap | 0.3 | DC | 0.2 | DC | 0.15 | DC |
I
Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD