Solid Carbide Endmills for Non-Ferrous Metals 2 ASM 2000 Type Flutes 2 Coated Carbide Carbon Steel Alloy Steel Pre-hardened Tempered Steel Die Steel Hardened Steel Stainless Ti Alloy Heat Resistant A loy Cast Iron Aluminum Copper Alloy Graphite CFRP Uncoated Steel 45 to 55 55 to 60 60 to 65 Steel Alloy HRC HRC HRC Flutes G S Corner Side Milling Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping –0.040–0.060 DMM h6 30° DC APMX LF Helix Angle ■ Body  Dimensions (mm) Cat. No. Stock Cutting diameter Depth of cut Total Length Shank diameter DC APMX LF DMM ASM 2020 D 2.0 6 40 4 2030 D 3.0 10 45 6 2040 D 4.0 12 45 6 2050 D 5.0 15 50 6 2060 D 6.0 15 50 6 ASM 2080 D 8.0 18 60 8 2100 D 10.0 22 71 10 2120 D 12.0 25 75 12 2140 D 14.0 32 90 16 2150 D 15.0 32 90 16 ASM 2160 D 16.0 32 90 16 Grade: H1 ■ General Purpose Machines 1. If the machine is not designed to achieve the recommended spindle speed, please use the max. spindle speed available. 2. If cutting noise and vibration are present, please change the cutting conditions accordingly. ap I aH ● Side Milling Work Material Solid Carbide Endmills Aluminum Alloy Cast Iron Cutting Conditions DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate (min-1) (mm/min) (min-1) (mm/min) 2.0 35,000 460 13,000 240 Square 3.0 23,400 770 8,750 275 4.0 17,500 800 6,550 310 2 Flutes 6.0 11,700 910 4,370 340 8.0 8,750 980 3,280 390 3 Flutes 10.0 7,000 1,100 2,620 400 4 Flutes 12.0 5,850 1,150 2,185 430 16.0 4,380 1,150 1,640 430 6 Flutes Standard ap 1.5DC 1.5DC 8 Flutes Depth-of-cut ae 0.1DC 0.1DC Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD I120