Каталог Sumitomo монолитные фрезы

Каталог Sumitomo инструмент для отрезки

Каталог Sumitomo токарные резцы (державки) для наружного точения

Общий каталог Sumitomo 2012

Каталог Sumitomo сплавы и режимы

Каталог Sumitomo специальные торцевые фрезы

Каталог Sumitomo фрезы со сменными пластинами

GSREGS MILL Roughing 4000SF

■ Recommended Cutting Conditions 1. If the machine cannot achieve the standard spindle speed, please use the max. spindle speed available. 2. If cutting noise and vibration are present, please reduce the cutting conditions accordingly. a DC

●Side	Milling
Work Material
Cond.	Structural Stee (150 to	l, Carbon Steel 250HB)	Cast FC,	Iron FCD	Alloy Ste (25 to 3	el SCM 5HRC)	Hardene (45 to 5	d Steel 0HRC)	Stainles SUS304,	s Steel SUS316	Heat Resi Titaniu	stant Alloy m Alloy
DC(mm)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)
6.0	4,800	1,200	5,800	1,500	3,200	380	2,600	400	5,300	250	1,600	90
7.0	4,100	1,200	5,000	1,500	2,700	380	2,200	400	4,500	250	1,350	90
8.0	3,600	1,200	4,500	1,500	2,400	380	2,000	400	4,000	250	1,250	90
9.0	3,200	1,200	4,000	1,500	2,100	380	1,800	400	3,500	250	1,050	90
10.0	2,800	1,200	3,500	1,500	1,900	380	1,600	400	3,200	250	1,000	100
11.0	2,600	1,200	3,000	1,400	1,700	380	1,500	400	2,900	250	900	100
12.0	2,400	1,200	2,900	1,400	1,600	400	1,300	400	2,600	250	800	100
14.0	2,200	1,100	2,600	1,300	1,300	380	1,100	350	2,200	200	700	100
16.0	1,800	900	2,200	1,100	1,200	380	1,000	350	2,000	180	600	100
18.0	1,400	700	1,800	900	1,000	380	900	300	1,800	150	550	100
20.0	1,400	700	1,700	850	850	380	800	300	1,600	150	500	100
Standard ap						1.5	DC
Depth-of-cut ae			0.5	DC					0.3	DC

●Groo Work Material	ve Milling
Cond.	Structural Stee (150 to	l, Carbon Steel 250HB)	Cast FC,	Iron FCD	Alloy St (25 to 3	eel SCM 5HRC)	Hardene (45 to 5	d Steel 0HRC)	Stainles SUS304,	s Steel SUS316	Heat Resi Titaniu	stant Alloy m Alloy
DC(mm)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)
6.0	3,600	900	4,300	1,100	2,400	300	1,700	260	4,200	250	1,100	60
7.0	3,000	900	3,700	1,100	2,000	280	1,500	260	3,600	250	900	60
8.0	2,700	900	3,400	1,100	1,800	280	1,350	260	3,200	250	800	60
9.0	2,400	900	3,000	1,100	1,600	280	1,200	260	2,800	250	700	60
10.0	2,100	900	2,600	1,100	1,400	280	1,100	270	2,500	250	650	65
11.0	2,000	900	2,300	1,100	1,300	280	1,000	270	2,300	250	600	70
12.0	1,800	900	2,200	1,100	1,200	300	900	270	2,100	250	550	70
14.0	1,600	800	2,000	1,000	1,000	290	750	240	1,800	180	450	65
16.0	1,350	650	1,650	850	900	280	700	240	1,600	160	400	65
18.0	1,200	550	1,500	750	800	280	600	230	1,400	140	350	60
20.0	1,050	500	1,350	700	700	280	550	210	1,250	125	300	60
Standard Depth-of-cut ap			1.0	DC					0.5	DC

Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD

Каталог Sumitomo монолитные фрезы - страница 71

Навигация

GSREGS MILL Roughing 4000SF

Каталог Sumitomo монолитные фрезы - страница 71

Навигация

GSREGS MILL Roughing 4000SF

Отправьте заявку

На подбор необходимой оснастки и оборудования