Каталог Sumitomo монолитные фрезы - страница 49
Навигация
Каталог Sumitomo инструмент для отрезки
Каталог Sumitomo токарные резцы (державки) для наружного точения
Общий каталог Sumitomo 2012
Каталог Sumitomo сплавы и режимы
Каталог Sumitomo специальные торцевые фрезы
Каталог Sumitomo фрезы со сменными пластинами- I_001
- I_1-001
- I_1-002
- I_1-003
- I_1-004
- I_1-005
- I_1-006
- I_002
- I_003
- I_004
- I_005
- I_006
- I_007
- I_008
- I_009
- I_010
- I_011
- I_012
- I_013
- I_014
- I_015
- I_016
- I_017
- I_018
- I_019
- I_020
- I_021
- I_022
- I_023
- I_024
- I_025
- I_026
- I_027
- I_028
- I_029
- I_030
- I_031
- I_032
- I_033
- I_034
- I_035
- I_036
- I_037
- I_038
- I_039
- I_040
- I_041
- I_042
- I_043
- I_044
- I_045
- I_046
- I_047
- I_048
- I_049
- I_050
- I_051
- I_052
- I_053
- I_054
- I_055
- I_056
- I_057
- I_058
- I_059
- I_060
- I_061
- I_062
- I_063
- I_064
- I_065
- I_066
- I_067
- I_068
- I_069
- I_070
- I_071
- I_072
- I_073
- I_074
- I_075
- I_076
- I_077
- I_078
- I_079
- I_080
- I_081
- I_082
- I_083
- I_084
- I_085
- I_086
- I_087
- I_088
- I_089
- I_090
- I_091
- I_092
- I_093
- I_094
- I_095
- I_096
- I_097
- I_098
- I_099
- I_100
- I_101
- I_102
- I_103
- I_104
- I_105
- I_106
- I_107
- I_108
- I_109
- I_110
- I_111
- I_112
- I_113
- I_114
- I_115
- I_116
- I_117
- I_118
- I_119
- I_120
- I_121
- I_122
- I_123
- I_124
- I_125
- I_126
- I_127
- I_128
- I_129
- I_130
- I_131
- I_132
- I_133
- I_134
- I_135
- I_136
- I_137
- I_138
- I_139
- I_140
- I_141
- I_142
- I_143
- I_144
- I_145
- I_146
SSUPZX Coated UP Mill Slot 3000ZX
■ Recommended Cutting Conditions 1. If the machine cannot achieve the standard spindle speed, please use the max. spindle speed available. 2. If cutting noise and vibration are present, please reduce the cutting conditions accordingly.
a DC
- e
Side Milling and Groove Milling
| Work Material Cond. | Carbon Ste `（`150 to | el, Cast Iron 250HB`）` | Alloy St (25 to 3 | eel SCM 5HRC) | Tempere Harden (40 to 5 | d Steel, ed Steel 0HRC) | Stainless | Steel () | Heat Resi Titaniu (20 to | stant Alloy m Alloy 45HRC) |
| DC(mm) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) |
| 2.0 | 9,000 | 540 | 6,000 | 320 | 4,000 | 240 | 5,500 | 240 | 2,600 | 90 |
| 4.0 | 6,600 | 600 | 4,500 | 340 | 3,000 | 280 | 4,000 | 240 | 2,000 | 90 |
| 6.0 | 4,800 | 720 | 3,000 | 360 | 2,500 | 280 | 3,000 | 360 | 1,200 | 90 |
| 8.0 | 3,600 | 750 | 2,200 | 460 | 2,000 | 300 | 2,000 | 390 | 1,000 | 100 |
| 10.0 | 2,800 | 750 | 1,800 | 460 | 1,500 | 300 | 1,700 | 410 | 800 | 120 |
| 12.0 | 2,400 | 710 | 1,500 | 410 | 1,200 | 280 | 1,500 | 380 | 700 | 100 |
| 14.0 | 2,200 | 660 | 1,300 | 370 | 1,000 | 270 | 1,200 | 320 | 600 | 95 |
| 16.0 | 1,800 | 490 | 1,100 | 320 | 800 | 230 | 1,000 | 270 | 500 | 90 |
| Side ap | 1.5 | DC | ||||||||
| Milling ae | 0.1 | DC | 0.05 | DC | 0.1 | DC | 0.0 | 5DC | ||
| Groove Milling ap | 1.0 | DC | 0.2 | DC | 0.3 | DC | 0.2 | DC |
1. For groove milling of Stainless steel, use 60% of recommended spindle speed and 40% of recommended feed rate. (*) 2. If cutting noise and vibration are present, please reduce the cutting conditions accordingly.
- Slot Milling
| Work Material Cond. | Carbon Ste `（`150 to | el, Cast Iron 250HB`）` | Alloy St (25 to 3 | eel SCM 5HRC) | Temper Harden (40 to 5 | ed Steel, ed Steel 0HRC) | Stainle | ss Steel | Heat Resi Titaniu (20 to | stant Alloy m Alloy 45HRC) |
| DC(mm) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) | Spindle Speed (min-1) | Feed Rate (mm/min) |
| 2.0 | 9,000 | 150 | 6,000 | 100 | 4,000 | 60 | 6,400 | 25 | 2,600 | 20 |
| 4.0 | 6,600 | 250 | 4,500 | 170 | 3,000 | 80 | 3,600 | 30 | 2,000 | 40 |
| 6.0 | 4,800 | 300 | 3,000 | 200 | 2,500 | 110 | 2,650 | 40 | 1,200 | 40 |
| 8.0 | 3,600 | 300 | 2,200 | 200 | 2,000 | 120 | 2,000 | 40 | 1,000 | 50 |
| 10.0 | 2,800 | 300 | 1,800 | 200 | 1,500 | 120 | 1,600 | 40 | 800 | 50 |
| 12.0 | 2,400 | 300 | 1,500 | 200 | 1,200 | 120 | 1,300 | 40 | 700 | 50 |
| 14.0 | 2,200 | 250 | 1,300 | 150 | 1,000 | 80 | 1,150 | 35 | 600 | 40 |
| 16.0 | 1,800 | 200 | 1,100 | 120 | 800 | 60 | 1,000 | 35 | 500 | 30 |
1. If cutting noise and vibration are present, please reduce the cutting conditions accordingly. 2. Supply water-soluble coolant when machining stainless steel, heat resistant alloy, and titanium alloy. Use dry machining (air blow) for all other work materials.
Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD