Каталог Sumitomo монолитные фрезы - страница 91

Предыдущая страница Следующая страница

Навигация

GSX MILL 4 Flute Radius Endmills Anti-vibration Type GSXVL 4000-R-2.5D Type ■ Recommended Cutting Conditions 1. For stable machining performance use rigid, high-precision machines and holders. 2. Use air blow when dry machining. 3. Use wet machining for stainless steel, heat resistant alloy, and titanium alloy applications. ap 4. If the machine cannot achieve the recommended spindle speed, please use the max. spindle speed available. ap ae DC ● Side Milling Work Material Carbon Steel ，Cast Iron Alloy Steel Tempered Steel・Hardened Steel Stainless Steel Cutting Conditions SS，SC，FC SCM NAK，HPM SUS304,SUS316 Titanium Alloy (150 to 250HB) (25 to 35HRC) (40 to 50HRC) DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) 2.0 13,000 1,000 10,000 800 8,000 700 10,000 580 5,000 200 4.0 9,600 1,200 8,000 1,000 6,000 800 5,500 650 3,000 230 6.0 6,800 1,500 5,600 1,200 4,200 900 3,800 680 2,100 240 8.0 5,200 1,600 4,400 1,300 3,200 950 2,800 650 1,600 250 10.0 4,200 1,500 3,500 1,200 2,600 800 2,300 600 1,300 210 12.0 3,500 1,400 3,000 1,200 2,200 700 1,900 550 1,100 180 14.0 3,000 1,200 2,600 1,100 1,800 600 1,600 500 900 150 16.0 2,700 1,100 2,200 1,000 1,600 600 1,400 480 760 130 18.0 2,400 1,000 2,000 900 1,400 570 1,300 450 680 120 20.0 2,200 900 1,700 800 1,200 550 1,100 400 600 100 25.0 1,700 680 1,400 630 1,000 450 890 310 480 82 Standard ap 1.5DC Depth-of-cut ae 0.2DC 0.05DC 0.1DC 0.05DC ● Groove Milling Work Material Carbon Steel ，Cast Iron Alloy Steel Tempered Steel・Hardened Steel Stainless Steel Cutting Conditions SS，SC，FC SCM NAK，HPM SUS304,SUS316 Titanium Alloy (150 to 250HB) (25 to 35HRC) (40 to 50HRC) DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) (min-1) (mm/min) 2.0 13,000 750 10,000 550 8,400 500 6,500 300 4,000 140 4.0 8,200 800 6,000 600 5,200 500 4,000 330 2,000 130 6.0 6,100 1,100 4,000 600 3,500 580 2,700 350 1,350 150 8.0 4,600 1,000 3,000 580 2,600 570 2,000 330 1,000 140 10.0 3,600 1,000 2,400 550 2,100 510 1,600 200 800 130 I 12.0 3,100 920 2,000 500 1,700 450 1,300 280 660 110 14.0 2,600 750 1,700 450 1,500 400 1,100 250 570 100 16.0 2,300 670 1,500 420 1,300 350 1,000 230 500 90 Endmills Coated 18.0 2,000 620 1,300 380 1,100 330 900 200 430 80 20.0 1,900 600 1,200 360 1,000 320 800 180 380 70 25.0 1,500 470 1,000 300 790 250 640 140 300 55 StandardDepth-of-cut ap 1.0DC 0.2DC 0.5DC 0.2DC Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD I85