Каталог Sumitomo монолитные фрезы

Каталог Sumitomo инструмент для отрезки

Каталог Sumitomo токарные резцы (державки) для наружного точения

Общий каталог Sumitomo 2012

Каталог Sumitomo сплавы и режимы

Каталог Sumitomo специальные торцевые фрезы

Каталог Sumitomo фрезы со сменными пластинами

GSX GSX MILL 4 Flute Radius Endmills40000-R-2D

■ General Purpose Machines 1. If the machine cannot achieve the standard spindle speed, please use the max. spindle speed available. 2. If cutting noise and vibration are present, please reduce the cutting conditions accordingly. 3. For groove milling of Stainless steel,use 60% of recommended spindle speed and 40% of recommended feed rate. (*)

Side Milling and Groove Milling

a DC e

Work Material Cutting Conditions	Structural Steel, Carb SS, S (150 to 2	on Steel, Cast Iron C, FC 50HB)	Alloy SC (25 to 3	Steel M 5HRC)	Tempered Steel NAK, (35 to 4	, Hardened Steel HPM 5HRC)	Hardene (45 to 5	d Steel 5HRC)	Stainless SUS304,	Steel () SUS316	Heat Resi Titaniu	stant Alloy m Alloy
DC(mm)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)
2.0	12,800	570	12,000	380	8,300	230	6,000	150	6,000	130	3,700	70
4.0	6,800	730	6,400	490	4,400	300	3,200	200	3,200	170	2,000	90
6.0	4,600	770	4,300	520	3,000	320	2,200	210	2,200	180	1,400	100
8.0	3,400	770	3,200	520	2,200	320	1,600	210	1,600	180	1,000	100
10.0	2,800	780	2,600	520	1,800	320	1,300	210	1,300	180	800	100
12.0	2,300	780	2,200	530	1,500	320	1,100	210	1,100	180	700	100
Side ap	1.5	DC	1.5	DC	1.5	DC	1.0	DC	1.5	DC	1.0	DC
Milling ae	0.1	DC	0.1	DC	0.0	5DC	0.02	DC	0.1	DC	0.05	DC
Groove Milling ap	0.5	DC	0.5	DC	0.2	DC	0.05	DC	0.3	DC	0.1	DC
●Side	Milling (Hi	gh Speed	Machinin	gCenter)
Work Material	Structural Steel, Carb	on Steel, Cast Iron	Alloy	Steel	Tempered Steel	, Hardened Steel	Hd	d Stl	Stil	Stl
	SS, S	C, FC	SC	M	NAK,	HPM	aren	ee	aness	ee ()
Cutting Conditions	(150 to 2	50HB)	(25 to 3	5HRC)	(35 to 4	5HRC)	(45 to 5	5HRC)	SUS304,	SUS316
DC(mm)	Spindle Speed	Feed Rate	Spindle Speed	Feed Rate	Spindle Speed	Feed Rate	Spindle Speed	Feed Rate	Spindle Speed	Feed Rate
	(min-1)	(mm/min)	(min-1)	(mm/min)	(min-1)	(mm/min)	(min-1)	(mm/min)	(min-1)	(mm/min)
2.0	47,800	2,200	47,800	1,600	39,800	1,200	31,800	900	15,900	400
4.0	23,900	2,600	23,900	1,900	19,900	1,400	15,900	1,100	8,000	490
6.0	16,000	2,700	16,000	2,000	13,300	1,500	10,600	1,200	5,300	510
8.0	12,000	2,700	12,000	2,000	10,000	1,500	8,000	1,200	4,000	520
10.0	9,600	2,700	9,600	2,000	8,000	1,500	6,400	1,200	3,200	520
12.0	8,000	2,700	8,000	2,000	6,700	1,500	5,300	1,200	2,700	520
Standard ap	1.5	DC	1.5	DC	1.5	DC	1.0	DC	1.5	DC
Depth-of-cut ae	0.05	DC	0.05	DC	0.0	5DC	0.02	DC	0.05	DC

I

Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD

Каталог Sumitomo монолитные фрезы - страница 87

Навигация

GSX GSX MILL 4 Flute Radius Endmills40000-R-2D

I

Каталог Sumitomo монолитные фрезы - страница 87

Навигация

GSX GSX MILL 4 Flute Radius Endmills40000-R-2D

I

Отправьте заявку

На подбор необходимой оснастки и оборудования