Каталог Sumitomo монолитные фрезы

Каталог Sumitomo инструмент для отрезки

Каталог Sumitomo токарные резцы (державки) для наружного точения

Общий каталог Sumitomo 2012

Каталог Sumitomo сплавы и режимы

Каталог Sumitomo специальные торцевые фрезы

Каталог Sumitomo фрезы со сменными пластинами

GSXVLGSX MILL 4 Flute Endmills Anti-vibration Type 4000-2.5D

■ Recommended Cutting Conditions 1. For stable machining performance use rigid, high-precision machines and holders. 2. Use air blow when dry machining. 3. Use wet machining for stainless steel, heat resistant alloy, and titanium alloy applications. 4. If the machine cannot achieve the recommended spindle speed, please use the max. spindle speed available. a DC

Side Milling

Work Material Cond.	Carbon Steel SS`，`S (150 to	`，`Cast Iron C`，`FC 250HB)	Alloy SC (25 to 3	Steel M 5HRC)	Tempered Steel`・` NAK`，` (40 to 5	Hardened Steel HPM 0HRC)	Stainle SUS304	ss Steel ,SUS316	Titaniu	m Alloy
DC(mm)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)
2.0	13,000	1,000	10,000	800	8,000	700	10,000	580	5,000	200
4.0	9,600	1,200	8,000	1,000	6,000	800	5,500	650	3,000	230
6.0	6,800	1,500	5,600	1,200	4,200	900	3,800	680	2,100	240
8.0	5,200	1,600	4,400	1,300	3,200	950	2,800	650	1,600	250
10.0	4,200	1,500	3,500	1,200	2,600	800	2,300	600	1,300	210
12.0	3,500	1,400	3,000	1,200	2,200	700	1,900	550	1,100	180
14.0	3,000	1,200	2,600	1,100	1,800	600	1,600	500	900	150
16.0	2,700	1,100	2,200	1,000	1,600	600	1,400	480	760	130
18.0	2,400	1,000	2,000	900	1,400	570	1,300	450	680	120
20.0	2,200	900	1,700	800	1,200	550	1,100	400	600	100
25.0	1,700	680	1,400	630	1,000	450	890	310	480	82
Standard ap					1.5	DC
Depth-of-cut ae		0.2	DC		0.05	DC	0.1	DC	0.0	5DC

Groove Milling

Work Material Cond.	Carbon Steel SS`，`S (150 to	`，`Cast Iron C`，`FC 250HB)	Alloy SC (25 to 3	Steel M 5HRC)	Tempered Steel`・` NAK`，` (40 to 5	Hardened Steel HPM 0HRC)	Stainles SUS304,	s Steel SUS316	Titaniu	m Alloy
DC(mm)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)	Spindle Speed (min-1)	Feed Rate (mm/min)
2.0	13,000	750	10,000	550	8,400	500	6,500	300	4,000	140
4.0	8,200	800	6,000	600	5,200	500	4,000	330	2,000	130
6.0	6,100	1,100	4,000	600	3,500	580	2,700	350	1,350	150
8.0	4,600	1,000	3,000	580	2,600	570	2,000	330	1,000	140
10.0	3,600	1,000	2,400	550	2,100	510	1,600	200	800	130
12.0	3,100	920	2,000	500	1,700	450	1,300	280	660	110
14.0	2,600	750	1,700	450	1,500	400	1,100	250	570	100
16.0	2,300	670	1,500	420	1,300	350	1,000	230	500	90
18.0	2,000	620	1,300	380	1,100	330	900	200	430	80
20.0	1,900	600	1,200	360	1,000	320	800	180	380	70
25.0	1,500	470	1,000	300	790	250	640	140	300	55
Standard Depth-of-cut ap		1.0	DC		0.2	DC	0.5	DC	0.2	DC

Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD

Каталог Sumitomo монолитные фрезы - страница 59

Навигация

GSXVLGSX MILL 4 Flute Endmills Anti-vibration Type 4000-2.5D

Каталог Sumitomo монолитные фрезы - страница 59

Навигация

GSXVLGSX MILL 4 Flute Endmills Anti-vibration Type 4000-2.5D

Отправьте заявку

На подбор необходимой оснастки и оборудования