Каталог Sumitomo монолитные фрезы - страница 113
Навигация
Каталог Sumitomo инструмент для отрезки
Каталог Sumitomo токарные резцы (державки) для наружного точения
Общий каталог Sumitomo 2012
Каталог Sumitomo сплавы и режимы
Каталог Sumitomo специальные торцевые фрезы
Каталог Sumitomo фрезы со сменными пластинами- I_001
- I_1-001
- I_1-002
- I_1-003
- I_1-004
- I_1-005
- I_1-006
- I_002
- I_003
- I_004
- I_005
- I_006
- I_007
- I_008
- I_009
- I_010
- I_011
- I_012
- I_013
- I_014
- I_015
- I_016
- I_017
- I_018
- I_019
- I_020
- I_021
- I_022
- I_023
- I_024
- I_025
- I_026
- I_027
- I_028
- I_029
- I_030
- I_031
- I_032
- I_033
- I_034
- I_035
- I_036
- I_037
- I_038
- I_039
- I_040
- I_041
- I_042
- I_043
- I_044
- I_045
- I_046
- I_047
- I_048
- I_049
- I_050
- I_051
- I_052
- I_053
- I_054
- I_055
- I_056
- I_057
- I_058
- I_059
- I_060
- I_061
- I_062
- I_063
- I_064
- I_065
- I_066
- I_067
- I_068
- I_069
- I_070
- I_071
- I_072
- I_073
- I_074
- I_075
- I_076
- I_077
- I_078
- I_079
- I_080
- I_081
- I_082
- I_083
- I_084
- I_085
- I_086
- I_087
- I_088
- I_089
- I_090
- I_091
- I_092
- I_093
- I_094
- I_095
- I_096
- I_097
- I_098
- I_099
- I_100
- I_101
- I_102
- I_103
- I_104
- I_105
- I_106
- I_107
- I_108
- I_109
- I_110
- I_111
- I_112
- I_113
- I_114
- I_115
- I_116
- I_117
- I_118
- I_119
- I_120
- I_121
- I_122
- I_123
- I_124
- I_125
- I_126
- I_127
- I_128
- I_129
- I_130
- I_131
- I_132
- I_133
- I_134
- I_135
- I_136
- I_137
- I_138
- I_139
- I_140
- I_141
- I_142
- I_143
- I_144
- I_145
- I_146
22 ASMAURORA Coat Endmills 2000DL
| 22 | DLC | Hardened Steel |
| 45 to 55 55 to 60 60 to 65 |
| HRC | HRC | HRC | ||
| FlutesFlutes | G S |
Coating Corner Side Milling Groove Milling Groove Finishing Face Milling Spot FacingSpot Facing Helical Milling Ramping
30°
Helix Angle
- Body
APMX LF
| Dimensio | ns(mm) | ||||
| Cat. No. | Stock | Cutting diameter DC | Depth of cut APMX | Total Length LF | Shank diameter DMM |
| ASM 2020DL | D | 2.0 | 6.0 | 40 | 4 |
| 2030DL | D | 3.0 | 10.0 | 45 | 6 |
| 2040DL | D | 4.0 | 12.0 | 45 | 6 |
| 2050DL | D | 5.0 | 15.0 | 50 | 6 |
| 2060DL | D | 6.0 | 15.0 | 50 | 6 |
| ASM 2080DL | D | 8.0 | 18.0 | 60 | 8 |
| 2100DL | D | 10.0 | 22.0 | 71 | 10 |
| 2120DL | D | 12.0 | 25.0 | 75 | 12 |
| 2160DL | D | 16.0 | 32.0 | 90 | 16 |
- General Purpose Machines
1. If the machine is not designed to achieve the recommended spindle speed, please use the max. spindle speed available. 2. If cutting noise and vibration are present, please change the cutting conditions accordingly.
- Groove Milling Work Material Aluminum Alloy
| Cutting Conditions | Wet | Dry | |
| Spindle Speed Feed Rate Spindle Speed Feed Rate | |||
| DC (mm) |
| (min -1) (mm/min) | (min-1) | (mm/min) | |
| 2.0 28,000 | 280 | 28,000 | 200 |
| 3.0 22,000 | 400 | 22,000 | 280 |
| 4.0 18,000 | 520 | 18,000 | 360 |
| 5.0 14,000 | 520 | 14,000 | 360 |
| 6.0 12,000 | 540 | 12,000 | 370 |
| 8.0 9,000 | 540 | 9,000 | 370 |
| 10.0 7,200 | 560 | 7,200 | 390 |
| 12.0 6,000 | 560 | 6,000 | 390 |
| 16.0 4,500 | 560 | 4,500 | 390 |
| a | 1.0DC | 0.5DC | |
| Standard | p | ||
| Depth-of-cut a | 1.0DC | 1.0DC |
e
Groove Milling (2 Flutes)
DC
Grade: DL1000
I
Square 2 Flutes 3 Flutes 4 Flutes 6 Flutes 8 Flutes Radius Ballnose DLC SUMIDIA Coat Long Neck Uncoated CBN PCD