Общий каталог Palbit - страница 348

GROOVING & PARTING OFF GRADES description CUTTING SPEED (m/min)
D
D
PVD GRADES
PVD Coating
GROOVING & PARTING OFF


GROOVING & PARTING OFF
CVD Coating
Grade
PH7920
fn (mm/r)
ISO Material Wear Resistence Toughness
HB
(brinell) PH5115 PH5125 PH5135 PH7920
P10-P35 0.04 -0.5 0.04 -0.5 0.04 -0.5 0.04 -0.5
M10-M25 Unalloyed steel 125-170 85-165 70-150 70-140 45-120
S10-S30
P Low-alloy steel 180-350 60-140 55-130 55-125 50-115
A micro grain size combined with the AlTiN High-alloy stel 200-325 50-130 45-115 45-115 50-110
PVD coating make it suitable for Roughing to
Finishing operations under good cutting con-
ditions to light interrupted cuts at medium
cutting speeds. Suitable for steels, stainless PVD Coating
CVD Coating
steel, HRSA. Grade
fn (mm/r)
ISO Material Wear Resistence Toughness
HB
(brinell) PH5115 PH5125 PH5135 PH7920
Grooving Plus & Parting Off


Grooving Plus & Parting Off
CVD GRADES 0.04 -0.5 0.04 -0.5 0.04 -0.5 0.04 -0.5
SS - Ferritic / Martensitic 200-330 65-175 55-165 45-155 45-140

PH5115 M SS - Austenitic / Duplex 180-330 65-150 55-140 50-130 50-125
PH5125 PH5135 SS - Ferritic / Duplex 230-260 65-140 55-130 50-125 50-120
P01-P30 P10-P35 P20-P40
M01-M25 M05-M30 M15-M35
K15-K30 Grade
CVD Coating
fn (mm/r)
Medium temperature CVD coating with Carbide grade suitable for medium machining Substrate grade binary (Wc & Co) with
α- Al2O3. Carbide grade with a gradient of steels & cast steels at medium cutting medium grain size combined with the medium
ISO Material Wear Resistence Toughness
HB
layer close to the surface. Suitable for high speeds. The substrate is suitable for the temperature CVD coating. Suitable for heavy (brinell) PH5705 PH5320 PH5135
to medium cutting speeds on steels & cast adhesion of the Alumina coating (α- Al2O3) roughing to roughing operations with inter- 0.04 -0.5 0.04 -0.5 0.04 -0.5
steels. medium temperature - CVD, improving the rupted cuts at medium to low cutting speeds.
Grooving & Parting Off


Grooving & Parting Off
Marble cast iron 130-230 95-180 75-160 75-155
tool life.
K Grey cast iron 180-220 90-175 70-155 70-140
Nodular cast iron 160-380 55-150 45-135 45-125

PH5320
Uncoated
K01-K25 Grade fn (mm/r)
ISO Material
PH0910
HB (brinell)
0.04 -0.35
Medium temperature CVD coating (α- Al2O3) Aluminium alloys 60-130 190-1800
combined with a hard substrate make it ca- N Cooper and cooper alloys 90-110 40-420
pable of withstanding interrupted conditions.
SAL - Swiss Automatic Lathes


SAL - Swiss Automatic Lathes
Recommended as general choice for roughing
of all cast irons at low to medium cutting
speeds. Can also be a solution for high alloy
steels. Grade fn (mm/r)
PVD Coating
ISO Material
PH7920
HB (brinell)
0.04 -0.30
UNCOATED CARBIDE GRADE Heat resistent super alloys (Iron base) 200-280 35-90
Heat resistent super alloys (Nickel base) 250-320 22-60
PH0910 S Heat resistent super alloys (Cobalt base) 200-320 27-80
Titanium alloys (400<or<1050[MPa]) - 85-175
N01-N20
Technical Data


Technical Data
Uncoated carbide micrograin grade combining
a good abrasive wear resistance and thou-
ghness. Suitable for rough to finish turning
of HRSA, Titanium alloys, cast irons and
Aluminium alloys.

D - 692 D - 693