Общий каталог Palbit - страница 82

A

M

dg

Threaded Coupling

Stock item | Produto de stock | Itens de stock Available under request (see page A-6) | Disponível sobre consulta (consulte a página A-6) | Disponible bajo consulta (mire pagina A-6)

VCGX 220530 |

Inserts | Pastilhas | Plaquitas

First choice | Primeira opção | 1ª opción Stock item | Produto de stock | Itens de stock Available under request (see page A-7) | Disponível sobre consulta Insert order code = (1) Geometry Code + (2) Grade Code

(consulte a página A-7) | Disponible bajo consulta (mire pagina A-7)

Shouldering Facing Slotting Plunging & Helical Ramp down Profiling

Recessing Interpolation SPARE PARTS | A Complementos | Repuestos

Order separately

Insert Screw Key (Torx) Key Torque Value

(Torx - Nm) Cutter ØDc Nm

Nm

R08390 – 32 P0451001 XT20 DT2050 5,00

Note: The toolholder is supplied with the XT/PT key. To order the DT key please check the page A-243. Check the procedures for the clamping screws on the page A-243. recommended cutting conditions | Condições de corte recomendadas | Condiciones de corte recomendables

Vc (m/min) HB Feed fz(mm/t)

ØDc Ø32 RPM (min-1) 9500 (Note 1) Cutting conditions ae/Dc=70%. (Note 2) It’s possible to occur vibrations in certain cases. Please reduce depth of cut and / or reduce cutting conditions in following cases: - When using long shank; - When using long tool overhang with arbor type; - When application has poor clamping rigidity or when using a low rigidity machine. (Note 3) Use internal coolant supply

RAMPING AND HELICAL INTERPOLATION

Descida em rampa e interpolação helicoidal | Bajada en rampa e interpolación circular DH di Lr Ramping Helical Interpolation

Blind hole Dc Flat bottom

Ødi = ØDH - ØDc

Ramping Helical Interpolation ØDc

Max Ramp aº Max ap Min Lr ØDHmin ØDHmax Max Pitch/Rev.

53,0 - 7,0

35 6,8 15,0 25,4

- 62,0 11,0

Note: During helical interpolation do not exceed max Pitch.