Общий каталог Palbit - страница 92

Общий каталог Palbit 2022

Profiling Facing

A	grades selection guide \|				A
		Guia para selecção de graus \| Tabla para selección de calidades
				Grades
		HB	Wear Resistance Toughness

ISO PSM Material

(Brinell) PH6103 PH7910 PH7920

	1	Unalloyed Steel	125-220	✓	✓	✓
P	2	Low-Alloyed Steel	220-280	✓	✓	✓
	3	High-Alloyed Steel	280-380	✓	✓	✓
	7	Malleable Cast Iron	130-230		✓	✓
							Good Conditions
K	8	Grey Cast Iron	180-245		✓	✓
	9	Nodular Cast iron	160-250				Average Conditions
Threaded Coupling H	12	Hardened Steels	40-55 HRC	✓			Difficult Conditions

(Note 1) Grade PH6103 must be used only on finishing operations.

Order code Código	Reference Referência Referencia		Dimensi ØDc	ons	Dimensõe M	s	Dimensio Ødg	nes (mm) L	Kg	Specification Ap max	s Insert Pastilha Inserto	Stock
181037500	025R45095-02-06-M12030	2	25	M12	21	30	0,079	(mm) 0,3	WNHU 060410
181037600	035R45095-03-06-M16035	3	35	M16	29	35	0,185	0,3	WNHU 060410
181037700	042R45095-04-06-M16035	4	42	M16	29	35	0,219	0,3	WNHU 060410

ISO	PSM	Material		Wear Resistance Toughness
			(Brinell)

Available under request (see page A-6) \| Disponível sobre consulta (consulte a página A-6) \| Disponible bajo consulta (mire pagina A-6) Stock item \| Produto de stock \| Itens de stock	1	Unalloyed Steel	125-220	180-300		190-280	160-250
P	2	Low-Alloyed Steel	220-280	180-250		180-240	150-230
	3	High-Alloyed Steel	280-380	180-230		170-220	140-220
	7	Malleable Cast Iron	130-230		-	180-320	170-290
WNHU 060410 \| K	8	Grey Cast Iron	180-245		-	170-280	140-250
Inserts \| Pastilhas \| Plaquitas
	9	Nodular Cast iron	160-250		-	100-240	90-220
H	12	Hardened Steels	40-55 HRC	140-220			- -

(Note 1) Grade PH6103 must be used only on finishing operations.

	P		M		K			N	S	H	Dimensions
CVD	PVD	CVD	PVD	CVD		PVD	UNC PCD		PVD	PVD	Dimensões

Dimensiones Grade code T9 P7 G1 G4 P3 G6 R1 G4 P3 G6 L5 L6 L9 G1 G4 P3 G6 10 D6 P3 G6 P7 (2) (mm) (1)

Geometry ISO

code	Reference	iC	S	I	R	F
1111424 WNHU 060410		9,53 4,76 3,40 1,00				-

(consulte a página A-7) | Disponible bajo consulta (mire pagina A-7)

SPARE PARTS |

Complementos | Repuestos Order separately

	Insert Screw	Key (Torx)		Key	Torque Value
Cutter			(Torx - Nm)
ØDc
			Nm
					Nm
R45095 - 25-42	P0350902	XT10		DT1020	2,0

Feed fz (mm/t) Insert ap Rec. Roughing Finishing

WNHU 060410 0.15-0.30 0.10-0.25 0.10-0.50

(Note 1) Cutting conditions should be adjusted according to the machine and work rigidity. (Note 2) If chattering occurs, reduce ap and Vc by 30% and keep the same fz per tooth.

Общий каталог Palbit - страница 92

Навигация

SPARE PARTS |

Отправьте заявку

На подбор необходимой оснастки и оборудования