Общий каталог Palbit - страница 57

Предыдущая страница Следующая страница

Навигация

MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data ap L PHS740 PH6103 PH7910 PH7920 PH7930 PH7740 PHM740 PH7920 PH7740 PH5705 PH5740 PH7910 PH7920 PH7930 PH7740 PH0910 PDP410 PH7930 PH7740 PH6103 MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data PLUS 49090 PLUS 49090WNHU Proprietary milling line Shouldering Facing A M WNHU 04T308 | Inserts | Pastilhas | Plaquitas A dg P M K N S H Dimensions CVD PVD CVD PVD CVD PVD UNC PCD PVD PVD Dimensões Threaded Coupling90º (2) Grade code T9 M6 G1 G4 P3 G6 R1 G4 G6 L5 L9 G1 G4 P3 G6 10 D6 P3 G6 M6 Dimensiones(mm)Dc(1)GeometryISO code Reference iC S I R F Order codeCódigo ReferenceReferênciaReferencia Dimensions | Dimensões | Dimensiones (mm) Specification InsertØDcMØdgLKgAp max(mm)Pastilha StockInserto 1112277 WNHU 04T308 PNER-LP 6,35 3,50 - 0,80 -First choice | Primeira opção | 1ª opciónStock item | Produto de stock | Itens de stockAvailable under request (see page A-7) | Disponível sobre consultaInsert order code = (1) Geometry Code + (2) Grade Code(consulte a página A-7) | Disponible bajo consulta (mire pagina A-7) 181136000 016R49090-02-07-M08023 2 16 M08 13 23 0,023 3,00 WNHU 04T308-LP 181128300 020R49090-03-07-M10028 3 20 M10 18 28 0,052 3,00 WNHU 04T308-LP181110900025R49090-04-07-M12030425M1221300,0783,00WNHU 04T308-LPGrades selection guide | Guia para selecção de graus | Tabla para selección de calidades 181128400 032R49090-05-07-M16035 5 32 M16 29 35 0,150 3,00 WNHU 04T308-LP Grades Stock item | Produto de stock | Itens de stock Available under request (see page A-6) | Disponível sobre consulta (consulte a página A-6) | Disponible bajo consulta (mire pagina A-6) ISO PSM Material HB Wear Resistance(Brinell)PH7920 ToughnessPH7930 1 Unalloyed Steel 125-220 ✓ ✓ P 2 Low-Alloyed Steel 220-280 ✓ ✓ 3 High-Alloyed Steel 280-380 ✓ ✓ Good Conditions 7 Malleable Cast Iron 130-230 ✓ ✓ K 8 Grey Cast Iron 180-245 ✓ ✓ Average Conditions 9 Nodular Cast iron 160-250 ✓ ✓ Difficult Conditions recommended cutting conditions | Condições de corte recomendadas | Condiciones de corte recomendables Vc (m/min) Cylindrical Shank90º ISO PSM Material HB(Brinell) Wear Resistance ToughnessPH7920PH7930 Order codeCódigo ReferenceReferênciaReferencia Dimensions | Dimensões | Dimensiones (mm) Specification InsertØDcØd/MLL1KgAp max(mm)Pastilha StockInserto 1 Unalloyed Steel 125-220 160-250 140-230P2Low-Alloyed Steel220-280150-230130-2103High-Alloyed Steel280-380140-200120-180 181136100 016E49090-02-07-U015150 2 16 15 150 32 0,185 3,00 WNHU 04T308-LP 7 Malleable Cast Iron 130-230 170-290 150-270 181136200 020E49090-03-07-U019150 3 20 19 150 40 0,292 3,00 WNHU 04T308-LP K 8 Grey Cast Iron 180-245 140-250 120-230 9 Nodular Cast iron 160-250 90-220 70-200 181136300 025E49090-04-07-U024150 4 25 24 150 50 0,471 3,00 WNHU 04T308-LP Stock item | Produto de stock | Itens de stock Available under request (see page A-6) | Disponível sobre consulta (consulte a página A-6) | Disponible bajo consulta (mire pagina A-6) Feed fz (mm/t) SPARE PARTS | Complementos | Repuestos Insert Roughing Finishing ap Rec. Order separately WNHU 04T308-LP 0.15-0.30 0.10-0.25 0.50-3.00 Cutter Insert Screw Key (Torx) Key(Torx - Nm)Torque ValueØDcNmNm (Note 1) Cutting conditions should be adjusted according to the machine and work rigidity.(Note 2) If chattering occurs, reduce ap and Vc by 30% and keep the same fz per tooth. R49090 - 20-32 P0250704 XT08 DT0812 1,2 E49090 - 16-25 P0250704 XT08 DT0812 1,2 Note: The toolholder is supplied with the XT/PT key. To order the DT key please check the page A-243. Check the procedures for the clamping screws on the page A-243. page A-236 page A -244 page A-236 page A -244 A - 110 A - 111