Общий каталог Palbit - страница 91

Предыдущая страница Следующая страница

Навигация

MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data PHS740 PH7603 PH7910 PH7920 PH7930 PH7740 PHM740 PH7920 PH7930 PH7740 PH5705 PH5320 PH5740 PH7910 PH7920 PH7930 PH7740 PH0910 PDP410 PH7930 PH7740 PH7603 MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data PLUS 49095 PLUS 49095WNHU Proprietary milling line Profiling Facing A grades selection guide | Guia para selecção de graus | Tabla para selección de calidades A Grades ISO PSM Material HB Wear Resistance Toughness(Briinell)PH6103PH7910PH7920 1 Unalloyed Steel 125-220 ✓ ✓ ✓ P 2 Low-Alloyed Steel 220-280 ✓ ✓ ✓ 3 High-Alloyed Steel 280-380 ✓ ✓ ✓ 7 Malleable Cast Iron 130-230 ✓ ✓ Good conditions K 8 Grey Cast Iron 180-245 ✓ ✓ 9 Nodular Cast iron 160-250 ✓ ✓ Average Conditions Threaded Coupling H 12 Hardened Steels 40-55 HRC ✓ Difficult Conditions (Note 1) Grade PH6103 must be used only on finishing operations. Order codeCódigo ReferenceReferênciaReferencia Dimensions | Dimensões | Dimensiones (mm) Specifications InsertØDcMØdgLKgAp max(mm)PastilhaStockInserto recommended cutting conditions | Condições de corte recomendadas | Condiciones de corte recomendables 181030400 016R49095-02-07-M08023 2 16 M8 13 23 0,024 0,50 WNHU 04T310 Vc (m/min) 181028600 020R49095-03-07-M10028 3 20 M10 18 28 0,052 0,50 WNHU 04T310 ISO PSM Material HB(Brinell) Wear Resistance Toughness 181030500 025R49095-04-07-M12030 4 25 M12 21 30 0,082 0,50 WNHU 04T310 PH6103 PH7910 PH7920 181030600 035R49095-05-07-M16035 5 35 M16 29 35 0,190 0,50 WNHU 04T310 1 Unalloyed Steel 125-220 180-300 190-280 160-250 Stock item | Produto de stock | Itens de stock Available under request (see page A-6) | Disponível sobre consulta (consulte a página A-6) | Disponible bajo consulta (mire pagina A-6) P 2 Low-Alloyed Steel 220-280 180-250 180-240 150-230 3 High-Alloyed Steel 280-380 180-230 170-220 140-200 7 Malleable Cast Iron 130-230 - 180-320 170-290 K 8 Grey Cast Iron 180-245 - 170-280 140-250 WNHU 04T310 | Inserts | Pastilhas | Plaquitas 9 Nodular Cast iron 160-250 - 100-240 90-220 H 12 Hardened Steels 40-55 HRC 140-220 - - (Note 1) Grade PH6103 must be used only on finishing operations. Feed fz (mm/t) Insert ap Rec. Roughing Finishing WNHU 04T310 0.15-0.25 0.10-0.20 0.10-0.50 P M K N S H Dimensions CVD PVD CVD PVD CVD PVD UNC PCD PVD PVD Dimensões(2) Grade codeT9P7G1G4P3G6R1G4P3G6L5L6L9G1G4P3G610D6P3G6P7Dimensiones(mm)(Note 1) Cutting conditions should be adjusted according to the machine and work rigidity.(Note 2) If chattering occurs, reduce ap and Vc by 30% and keep the same fz per tooth. (1) Geometry ISO code Reference iC S I R F 1110783 WNHU 04T310 6,35 3,50 2,80 1,00 - First choice | Primeira opção | 1ª opción Stock item | Produto de stock | Itens de stock Available under request (see page A-7) | Disponível sobre consulta Insert order code = (1) Geometry Code + (2) Grade Code (consulte a página A-7) | Disponible bajo consulta (mire pagina A-7) SPARE PARTS | Complementos | Repuestos Order separately Cutter Insert Screw Key (Torx) Key(Torx - Nm) Torque Value ØDc Nm Nm R49095 - 16-25 P0250704 XT08 DT0812 1,2 Note: The toolholder is supplied with the XT/PT key. To order the DT key please check the page A-243. Check the procedures for the clamping screws on the page A-243. page A-236 page A -244 page A-236 page A -244 A - 178 A - 179