Общий каталог Palbit - страница 156

Предыдущая страница Следующая страница

Навигация

jet drills TDS & TDC DRILL TYPE

B Recommended Speeds and Feeds | Parâmetros de Corte Recomendados Hole Tolerance and Maximum Hole Size With Radial Adjustment | Tolerância do Furo e Dimensão Máxima do Furo com B

Recomendaciones de Datos de Corte Ajuste Radial | Tolerancia de los Agujeros y el Tamaño Delagujero Máximo con AjusteRadial

ISOMaterial Group Grupo Materiais Grupo MaterialesVc (m/min)Ø13~15,5Ø16~20Ø20,5~25Ø25,5~30Ø31~41Ø42~58Ø59~80
UNALLOYED STEEL (-0,25%)180-2600,05-0,080,06-0,100,07-0,120,09-0,150,11-0,180,15-0,280,11-0,18
LOW-ALLOY STEEL (0,25%-)150-2400,05-0,080,06-0,100,07-0,120,09-0,150,11-0,180,15-0,280,11-0,18
PLOW-ALLOY STEEL120-2400,05-0,080,06-0,100,07-0,120,09-0,150,11-0,180,15-0,280,11-0,18
HIGH-ALLOY STEEL130-2200,05-0,080,06-0,100,07-0,120,09-0,150,11-0,180,15-0,280,11-0,18
MSTAINLESS STEEL150-2200,04-0,080,05-0,090,06-0,120,07-0,130,08-0,160,10-0,200,08-0,16
GREY CAST IRON150-2500,05-0,110,07-0,130,08-0,120,10-0,180,14-0,260,18-0,350,14-0,26
KCAST IRON WITH NODULAR CAST120-2000,05-0,110,06-0,130,07-0,120,08-0,180,14-0,260,18-0,350,14-0,26
ALUMINIUM FORGING ALLOYS300-3800,04-0,060,05-0,070,06-0,080,07-0,090,10-0,140,12-0,170,10-0,14
NALUMINIUM CAST ALLOYS260-3300,04-0,060,05-0,070,06-0,080,07-0,090,10-0,140,12-0,170,10-0,14
SSUPER-ALLOYS AND TITANIUM40-800,03-0,050,04-0,060,04-0,070,05-0,080,06-0,100,07-0,130,06-0,10
Drill DRadial AdjustMax Hole DDrill DRadial AdjustLING Max Hole D
13.001.5016.0033.003.00DRIL 39.00
13.501.5016.5034.002.8039.60
14.001.5017.0035.002.50ls 40.00
14.501.5017.5036.002.30Jet Dril 40.60
15.001.5018.0037.002.0041.00
15.501.5018.5038.001.8041.60
16.001.5019.0039.001.50x Drills 42.00
16.501.5019.5040.001.20Integre 42.40
17.001.5020.0041.001.0043.00
17.501.5020.5042.004.20ls 50.40
18.001.4020.8043.004.00ex Dril 51.00
18.501.3021.1044.003.70Vort 51.40
19.001.2021.4045.003.5052.00
20.001.0022.0046.003.30Drills 52.60
21.001.6024.2047.003.00panning 53.00
22.001.5025.0048.002.70Tre 53.40
23.001.2525.5049.002.50ills 54.00
24.001.0026.0050.002.20bide Dr 54.40
25.000.8026.6051.002.00olid Car 55.00
26.002.5031.0052.001.80S 55.60
27.002.2031.4053.001.5056.00
28.002.1032.2054.001.20nserts 56.40
29.001.8032.6055.000.80I 56.60
30.001.5033.0056.000.6057.20
31.00 32.003.50 3.2038.00 38.4058.000.40are Parts 58.80

F = 0.2 mm/r

20

10 F = 0.05 mm/r

DRILL DIA (mm) Required Power (HIGH SPEED DRILL)

  • These chart is based on machining experiences using steels with a hardness of 200-250HB and cutting speed of 100m/min.
  • For cast iron the effective power requirement is around 30% lower.

Coolant pressure Coolant quality

7 30 6 25 5 20

3 10

DRILL DIA (mm) DRILL DIA (mm)