Общий каталог Palbit - страница 31

PLUS 90260 PLUS 90260
PNHX | PNKX

A A
recommended cutting conditions | Condições de corte recomendadas | Condiciones de corte recomendables
Vc (m/min) Vc (m/min)
HB Feed fz (mm/t)
ISO PSM Material Wear Resistance Toughness
MILLING


MILLING
(Brinell)
PH5705 PH7910 PH7920 PH5740 PNH(K)X 1105…
1 Unalloyed Steel 125-220 - 190-280 180-250 - 0,15-0,30
P 2 Low-Alloyed Steel 220-280 - 180-240 170-210 - 0,15-0,30
3 High-Alloyed Steel 280-380 - 170-220 160-200 - 0,15-0,25
7 Malleable Cast Iron 130-230 190-340 - - 170-300 0,12-0,35
K 8 Grey Cast Iron 180-245 180-300 - - 150-260 0,12-0,35
Overview


Overview
9 Nodular Cast iron 160-250 140-250 - - 130-220 0,12-0,30
(Note 1) Cutting conditions ae/DC=70%.
(Note 2) Cutting conditions should be ajusted according to the machine and work rigidity.
(Note 3) If chattering occurs, reduce ap and Vc by 30% and keep the same fz per tooth.
Face milling


Face milling
CHIP-BREAKER selection guide | Guia para aplicações do quebra-aparas | Guía para aplicación del rompevirutas
Hifeed milling


Hifeed milling
HB Chip-Breaker Application
ISO PSM Material
(Brinell) 1st choise Dificult Operations
1 Unalloyed Steel 125-220 PNH(K)X 11… MK -
P 2 Low-Alloyed Steel 220-280 PNH(K)X 11… MK -
Shoulder milling


Shoulder milling
3 High-Alloyed Steel 280-380 PNH(K)X 11… MK -
7 Malleable Cast Iron 130-230 PNH(K)X 11… MK PNH(K)X 11… HK
K 8 Grey Cast Iron 180-245 PNH(K)X 11… MK PNH(K)X 11… HK
9 Nodular Cast iron 160-250 PNH(K)X 11… MK PNH(K)X 11… HK
Profile milling


Profile milling
Hardmill


Hardmill
Center & Chamfer


Center & Chamfer
Spot face


Spot face
End Mills


End Mills
Spare parts


Spare parts
Technical Data


Technical Data
page A-236 page A -244 page A-236 page A -244
A - 58 A - 59