Общий каталог Palbit - страница 125

Предыдущая страница Следующая страница

Навигация

MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data MILLINGOverviewFace millingHifeed millingShoulder millingProfile millingHardmillCenter & ChamferSpot faceEnd MillsSpare partsTechnical Data MILLING GRADES Graus de fresagem | Calidades de fresado A PVD GRADES CVD GRADES A NEW TiC PH6103 PH7603 PH6910 Al OTop coating for easy wear detection. High strength aluminium oxide (P01-P05) (P01-P05) (P05-P10) coating with excellent thermical (H10-H20) (H10-H20) (K05-K10) resistance and hardness in high temperature. PVD coated sub micro-grain grade suitable PVD coated sub micro-grain grade suitable PVD (TiAlN SN) coated carbide grade with a for light finishing operations on steels & for light finishing operations on steels & very hard micro grain substrate for light hardened steels. This is the first choice for hardened steels. This is the first choice for milling of steels, cast irons and some finishing on mould steel. finishing on mould steel. hardened steels. Ti (C,N) Fine grain (titanium carbide) PHS740 coating with columnar struture wich is hard and wear resistance P30-50 against abrasive wear. Ideal for medium to roughing operation in PH6920 PH6930 PH6740 steels at medium cutting (P20-P40) (P30-P50) SUBSTRATE speeds. (M20-M30) (M30-M50) (K20-K40) (K30-K40) Cemented-carbide substrate that combines high strength with An advanced PVD TiAlN coated gradeover atough wear resistance sub-microsubstrate for general purpose machining ofstainless steels & titanium alloys.Micro-grain carbide grade suitable forapplications with instability conditions.Excellent solution for medium cuttingspeed applicationsPVD (TiAlN SN) large thickness coatedgrade for heavy roughing applications.Can work on all type of materials andendures a lot of vibration.reliable toughness. MT-CVD coated carbide grade with a hard Substrate grade binary (Wc-Co) with medium MT-CVD coated carbide grade with fine substrate and very smooth surface. Ideal grain size combined with the medium substrate, ideal for medium to high speed for high speed cutting of cast irons. temperature coating. Suitable for heavy cutting of cast irons. PH6125 PH6135 PH7910 roughing to roughing operations of cast irons Can be used wet or dry.with interruped cut at medium to low cutting (P20-P30) (P30-P40) (P05-P10) speeds. (K05-K10) PVD coated carbide grade for light to heavy PVD coated carbide four toughnessmilling (wet and dry) in steel at elevatesdemanding operations in milling of steels.temperature (e.g. in hardened steels orExcellent solutions for instable applicationsprehardened steels). Excellent grade toand can be apply in wet or dry.A highly wear-resistant AlTiN-PVD-coatedgrade primarily for light machining andsemi-finishing in steels and hardened steels.milling of mould steels at high productivity.TiBNAl Ocrystalline diamondUncoated Carbide GradePHM740Ti (C,N)PH0910(M30-M40)PHD103(S30-S40) Substrate A new MT-CVD coated carbide grade for medium to heavy milling applications on Uncoated carbide micro-grain grade combining instable conditions. Recommended for high-temp alloys and stainless steel materials. Canbe used either wet or dry.Carbide with highly abrasion-resistantdiamond coating for graphite machininga good abrasive wear resistance and toughness.Suitable for rough to finish operations of HRSA,Titanium alloys, Cast irons and Aluminium alloys. PH7920 PH7930 PH7740 cubic boron nitrite polycrystalline diamond (P10-P35) (S10-S30) (P20-P40) (S25-S35) (P30-P50) (S30-S40) (M10-M25) (M20-M30) (M30-M50) (K10-K30) (K20-K40) (K30-K40) PBH910 PDP403 PDP410 Advanced AlTiN-PVD coated carbide over atough wear resistance submicro susbtratefor general puporse machining of steelsand cast irons at high cutting speeds.AlTiN-PVD coated carbide developed toprovide better performance in generalmachining of stainless-steels and high-tempalloys. Resistant to breakage and offerimproved wear resistance and increasedstrength.Very tough, general-purpose AlTiN-PVDcoated carbide grade for medium toheavy milling applications and on instableconditions.Recommended for high-temp alloys, allsteels and cast irons. Can be used eitherwet or dry.Cubic Boron Nitride grade for finishing ofPolycrystalline diamond grade for finishingPolycrystalline diamond grade for finishinghardened steel and cast iron.and semi finishing of non-ferrous metallicand semi finishing of non-ferrous metallicmaterials. It is a excellent solution formaterials. It is a excellent solution foraluminium alloys with high content of Si.aluminium alloys with low content of Si. A - 246 A - 247