Каталог Sumitomo пластины с кубическим нитридом бора Sumiboron - страница 123
Навигация
Каталог Sumitomo резьбонарезной инструмент
Каталог Sumitomo инструмент для отрезки
Каталог Sumitomo инструмент для обработки канавок
Каталог Sumitomo модульные фрезерные системы
Каталог Sumitomo пластины с алмазными вставками Sumidia
Каталог Sumitomo пластины с режущей кромкой-моноалмаз Sumicristal- L001
- L002
- L003
- L004
- L005
- L006
- L007
- L008
- L009
- L010
- L011
- L012
- L013
- L014
- L015
- L016
- L017
- L018
- L019
- L020
- L021
- L022
- L023
- L024
- L025
- L026
- L027
- L028
- L029
- L030
- L031
- L032
- L033
- L034
- L035
- L036
- L037
- L038
- L039
- L040
- L041
- L042
- L043
- L044
- L045
- L046
- L047
- L048
- L049
- L050
- L051
- L052
- L053
- L054
- L055
- L056
- L057
- L058
- L059
- L060
- L061
- L062
- L063
- L064
- L065
- L066
- L067
- L068
- L069
- L070
- L071
- L072
- L073
- L074
- L075
- L076
- L077
- L078
- L079
- L080
- L081
- L082
- L083
- L084
- L085
- L086
- L087
- L088
- L089
- L090
- L091
- L092
- L093
- L094
- L095
- L096
- L097
- L098
- L099
- L100
- L101
- L102
- L103
- L104
- L105
- L106
- L107
- L108
- L109
- L110
- L111
- L112
- L113
- L114
- L115
- L116
- L117
- L118
- L119
- L120
- L121
- L122
- L123
- L124
- L125
- L126
MOLD FINISH MASTER
SUMIBORON BNBP
■ Recommended Cutting Conditions 1. Use a machine with high rigidity for stable cutting. 2. Non-water soluble coolant recommended. Supply as a mist or external coolant. Take fire prevention precautions to avoid fire hazards caused by sparks igniting during machining or tool breakage. 3. Shorten overhang as much as possible. 4. Adjust cutting conditions as necessary as machine rigidity and other conditions may vary. 5. Depth of cut shown in the table of conditions are maximum depths. Adjust the actual depth of cut to the desired machined surface finish.
pf
| Work | Material | STAVAX | , NAK80, SK | D61 (Up to 5 | 2HRC) | ELMAX, DC | 53, SKD11 i | mproved (Up | to 62HRC) | YXR3, SKH (U | p to 70HRC | ) | |
| RE (mm) | LU (mm) | Spindle Speed (min-1) | Feed Rate (mm/min) | ap(`㎜`) | pf(`㎜`) | Spindle Speed (min-1) | Feed Rate (mm/min) | ap(`㎜`) | pf(`㎜`) | Spindle Speed (min-1) | Feed Rate (mm/min) | ap(`㎜`) | pf(`㎜`) |
| 1.2 | 40,000 | 1,000 | 0.005 | 0.010 | 40,000 | 800 | 0.005 | 0.010 | 40,000 | 600 | 0.005 | 0.005 | |
| 02 | 2.0 | 40,000 | 800 | 0.005 | 0.010 | 40,000 | 600 | 0.005 | 0.010 | 40,000 | 400 | 0.005 | 0.005 |
| . | 3.0 | 40,000 | 600 | 0.005 | 0.010 | 40,000 | 500 | 0.005 | 0.010 | 40,000 | 300 | 0.005 | 0.005 |
| 4.0 | 40,000 | 500 | 0.005 | 0.010 | 40,000 | 400 | 0.005 | 0.005 | 40,000 | 200 | 0.005 | 0.005 | |
| 1.5 | 40,000 | 1,600 | 0.020 | 0.020 | 40,000 | 1,400 | 0.010 | 0.020 | 40,000 | 1,200 | 0.010 | 0.020 | |
| 2.0 | 40,000 | 1,500 | 0.010 | 0.020 | 40,000 | 1,300 | 0.010 | 0.020 | 40,000 | 1,100 | 0.010 | 0.010 | |
| 03 | 3.0 | 40,000 | 1,400 | 0.010 | 0.020 | 40,000 | 1,200 | 0.010 | 0.020 | 40,000 | 1,000 | 0.010 | 0.010 |
| . | 4.0 | 30,000 | 1,200 | 0.010 | 0.010 | 30,000 | 1,000 | 0.010 | 0.010 | 30,000 | 700 | 0.005 | 0.010 |
| 5.0 | 30,000 | 800 | 0.010 | 0.010 | 30,000 | 700 | 0.005 | 0.010 | 30,000 | 600 | 0.005 | 0.005 | |
| 6.0 | 30,000 | 600 | 0.005 | 0.010 | 30,000 | 500 | 0.005 | 0.005 | 30,000 | 400 | 0.005 | 0.005 | |
| 2.5 | 40,000 | 2,800 | 0.040 | 0.050 | 40,000 | 2,800 | 0.030 | 0.040 | 40,000 | 2,200 | 0.020 | 0.030 | |
| 3.0 | 40,000 | 2,600 | 0.040 | 0.050 | 40,000 | 2,600 | 0.030 | 0.040 | 40,000 | 2,100 | 0.020 | 0.030 | |
| 0.5 | 4.0 | 40,000 | 2,400 | 0.030 | 0.050 | 40,000 | 2,400 | 0.020 | 0.030 | 40,000 | 2,000 | 0.020 | 0.020 |
| 6.0 | 25,000 | 1,500 | 0.020 | 0.030 | 25,000 | 1,500 | 0.010 | 0.020 | 25,000 | 1,300 | 0.010 | 0.010 | |
| 8.0 | 16,000 | 1,200 | 0.020 | 0.020 | 16,000 | 1,100 | 0.010 | 0.020 | 16,000 | 850 | 0.010 | 0.010 | |
| 0.75 | 4.0 | 32,000 | 2,400 | 0.030 | 0.030 | 32,000 | 2,200 | 0.020 | 0.030 | 32,000 | 2,000 | 0.020 | 0.020 |
| 10 | 5.5 | 40,000 | 4,000 | 0.050 | 0.050 | 40,000 | 4,000 | 0.030 | 0.030 | 40,000 | 3,000 | 0.020 | 0.030 |
| . | 8.0 | 32,000 | 3,000 | 0.030 | 0.050 | 32,000 | 2,600 | 0.020 | 0.030 | 32,000 | 2,200 | 0.010 | 0.020 |