Каталог Sumitomo инструмент для обработки канавок - страница 8

Предыдущая страница Следующая страница

Навигация

Triangular Grooving Insert with Chipbreaker SumiTurn B-Groove ■ Characteristics For the grooving insert TGA Type, the SumiTurn B-Groove (BF Type) with chipbreaker that solves the chip control problem now has a whole series. ■ Features ● Implements good chip control in a wide range of grooving. ● Traverse machining at the groove base is a countermeasure for chip control ● Expanding from 14 items for snap ring grooving, we have 1.4 mm to 4.5 mm edge widths (for a total of 60 items) in stock. ● From steel and stainless steel to non-ferrous metal, it enables the long tool life of various work materials. We stock the AC530U with Super ZX coat. ■ Insert with chipbreaker for corner groove BF type F CW 0.025 Grade Cutting edge shape GAN Grooving GAN Fig 1 Fig 2 E2 Coated carbide AC530U Honing 15° Tools RE RE * See page F5 for the rake angle with a holder fitted. IC CDX Note 1: Be careful that inserts with edge width CW less than 1.85mm have different Grooving cutting edge distance E2. Note 2: This figure shows right handed tools. Cut-Off S Threading Dimensions (mm) Coated carbide Width Max. groove depth Groove Nose Inscribed Cutting of cut Thickness edge * Cat. No. AC530U (mm) (mm) depth radius circle distance Fig Group No. R L CW External Internal CDX RE IC S E2 TGA R/L4140BF01 D D 1.40 2.0 1.7 2.5 0.1 12.70 4.76 0.300 2 ❷ TGA R/L4165BF01 D D 1.65 0.175 2 TGA R/L4190BF01 D D 1.90 3.5 2.5 3.9 0.1 12.70 4.76 ❸ 0 1 TGA R/L4220BF01 D D 2.20 ■ Recommended Cutting Conditions TGA R/L4270BF02 D D 2.70 material Groove width CW (mm) Work TGA R/L4320BF02 D D 3.20 5.0 2.5 5.4 0.2 12.70 4.76 0 1 ❹ Process Cutting conditions TGA R/L4420BF02 D D 4.20 1.4–2.3 2.5–3.3 3.5–4.5 TGA R/L4150BF D D 1.50 0.250 Cutting speed vc (m/min) 50 to 180 50 to 180 50 to 180 TGA R/L4165BF D D 1.65 0.175 2 P Feed rate f (mm/rev) 0.03 to 0.12 0.04 to 0.12 0.05 to 0.12 TGA R/L4175BF D D 1.75 0.125 General steel TGA R/L4185BF D D 1.85 3.5 2.5 3.9 0.2 12.70 4.76 0.075 ❸ Grooving External Up to 3.5 Up to 5.0 Up to 5.0 Depth of cut TGA R/L4200BF D D 2.00 ap (mm) TGA R/L4220BF D D 2.20 0 1 Internal Up to 2.5 Up to 2.5 Up to 2.5 TGA R/L4230BF D D 2.30 Feed rate f (mm/rev) 0.03 to 0.10 0.05 to 0.10 0.07 to 0.12 TGA R/L4250BF D D 2.50 Traverse TGA R/L4265BF D D 2.65 Depth of cut ap (mm) Up to 0.3 Up to 0.5 Up to 0.7 TGA R/L4270BF D D 2.70 Cutting speed vc (m/min) 50 to 160 50 to 160 50 to 160 TGA R/L4280BF D D 2.80 TGA R/L4300BF D D 3.00 M Feed rate f (mm/rev) 0.03 to 0.12 0.04 to 0.12 0.05 to 0.12 0.3 Stainless steel TGA R/L4320BF D D 3.20 TGA R/L4330BF D D 3.30 Grooving Depth of cut External Up to 3.5 Up to 5.0 Up to 5.0 TGA R/L4350BF D D 3.50 ap (mm) 5.0 2.5 5.4 12.70 4.76 0 1 ❹ Internal Up to 2.5 Up to 2.5 Up to 2.5 TGA R/L4370BF D D 3.70 TGA R/L4390BF D D 3.90 Feed rate f (mm/rev) 0.03 to 0.10 0.05 to 0.10 0.07 to 0.12 Traverse TGA R/L4400BF D D 4.00 Depth of cut ap (mm) Up to 0.3 Up to 0.5 Up to 0.7 TGA R/L4410BF D D 4.10 TGA R/L4420BF D D 4.20 0.4 Note: See the group numbers of GWC, GWCS, and GWCI types on pages F4 and F5 TGA R/L4430BF D D 4.30 to find applicable holders. TGA R/L4440BF D D 4.40 Inserts and holders that have corresponding group numbers can be used together. TGA R/L4450BF D D 4.50 F8