Общий каталог ZCC-CT 2019

Каталог ZCC-CT сверла со сменными пластинами

Каталог ZCC-CT сверла монолитные

Каталог ZCC-CT оснастка

Каталог ZCC-CT расточные системы

Каталог ZCC-CT фрезы со сменными пластинами

Каталог ZCC-CT фрезы монолитные

A End mill – GM series

				up		5501R 5601R 5502R 5602R St	304GF 304GF 304GF 304GF arting valu	es for cut	ting spee	GM- GM- d vc[m/m	4F-G 4EFP in]
Material group	Composition / struc	ture / heat treatment	Brinell hardness	ning gro	Slot m Ø [mm]	illing ap max	Shoulde Ø [mm]	r milling ae max	Slot m Ø [mm]	illing ap max	Shoulde Ø [mm]	r milling ae max
			HB	achi	0 < x < 3	0,1 x D	0 < x ≤ 20	< 0,5 x D	0 < x < 3	0,1 x D	0 < x ≤ 20	< 0,5 x D
				M	3 ≤ x ≤ 20	0,8 x D			3 ≤ x ≤ 20	0,8 x D
						KMG	303			KMG	303
						ae	/ D			ae	/ D
					1/1	1/2	1/10	f-group	1/1	1/2	1/10	f-group
	approx. 0,15 % C	annealed	125	1	155	200	265	2	150	200	270	2
	approx. 0,45 % C	annealed	190	2	150	190	255	2	145	190	260	2
Unalloyed steel	approx. 0,45 % C	tempered	250	3	110	140	190	2	105	140	190	2
	approx. 0,75 % C	annealed	270	4	95	120	160	2	90	120	165	2
	approx. 0,75 % C	tempered	300	5	90	110	150	2	85	110	150	2
P		annealed	180	6	120	150	200	2	115	150	205	2
Low-alloyed steel		tempered	275	7	95	120	160	2	90	120	165	2
		tempered	300	8	90	110	150	2	85	110	150	2
		tempered	350	9	85	105	140	2	80	105	145	2
High-alloyed steel and high-alloyed		annealed	200	10	110	140	190	2	105	140	190	2
tool steel		hardened and tempere	325 d	11	85	110	145	2	80	110	145	2
	ferritic/martensitic	annealed	200	12	50	65	85	2	50	65	90	2
M Stainless steel	martensitic	tempered	240	13	45	60	75	2	45	60	80	2
	austenitic	quench hardened	180	14	55	70	95	2	55	70	95	2
	austenitic-ferritic		230	15	45	60	75	2	45	60	80	2
Grey cast iron	perlitic/ferritic		180	16	115	150	195	2	110	150	200	2
	perlitic (martensitic)		260	17	95	120	160	2	90	120	165	2
	ferritic		160	18	140	180	240	2	135	180	245	2
K Cast iron with spheroidal graphite
	perlitic		250	19	110	140	190	2	105	140	190	2
Malleable cast iron	ferritic		130	20	155	200	265	2	150	200	270	2
	perlitic		230	21	125	160	215	2	120	160	220	2
	cannot be hardened		60	22
Aluminium wrought alloys
	hardenable	hardened	100	23
	≤ 12 % Si, cannot be hardened		75	24
N Cast aluminium alloys	≤ 12 % Si, hardenable	hardened	90	25
	> 12 % Si, cannot be hardened		130	26
	machining steel, PB> 1%		110	27
Copper and copper alloys (bronze/brass)	CuZn, CuSnZn		90	28
	CuSn, Pb-free copper, electrol	ytic copper	100	29
		annealed	200	30
	Fe-based alloys
		hardened	280	31
Heat-resistant alloys		annealed	250	32
S	Ni or Co bass	hardened	350	33
		cast	320	34
	pure titanium		Rm400	35
Titanium alloys	α and β alloys	hardened	Rm1050	36
Hardened steel		hardened and tempere hardened and tempere	55 HRC 60 HRC d d	37 38
H Hard cast iron		cast	400	39
Hardened cast iron		hardened and tempere	55 HRC d	40
	Thermoplasts			41
	Thermosetting plastics			42
	Plastic, glass-fibre reinforced G	i FRP		43
X Non-metallic materials	Plastic, carbon fibre reinforced	i CFRP		44
	Graphite Wood			45 46

Note: The given cutting values are guide values, which were determined under ideal conditions. The values have to be adapted in individual cases. Feed rate recommendations on page B460.

Общий каталог ZCC-CT 2019 - страница 903

Навигация

A End mill – GM series

Общий каталог ZCC-CT 2019 - страница 903

Навигация

A End mill – GM series

Отправьте заявку

На подбор необходимой оснастки и оборудования