Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 650

Предыдущая страница Следующая страница

Навигация

SDEW 09

ICD1S
[mm][mm][mm]RE
09039.5254.403.18

15° IC S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer toour MachiningCalculator app for further calculations.
REPM KNSH
Product
vcfapvc f ap vc fapvc fapvcfapvc fap
[mm][m/min][mm/tooth][mm][m/min] [mm/tooth] [mm] [m/min] [mm/tooth][mm][m/min] [mm/tooth][mm][m/min][mm/tooth][mm][m/min] [mm/tooth][mm]
E
EN geometry withzerorake angle design for 45° chamfer milling.
SDEW 090308ENM83300.82350.104.5– – – 220 0.104.5– –––––45 0.151.0
M83400.82100.104.5– – – 195 0.104.5– –––––– ––
20°0,15S
SN geometry withzerorake angle design for 45° chamfer milling.
SDEW 090308SN82150.82150.154.5– – – 200 0.154.5– –––––40 0.151.0
M83300.82150.154.5– – – 200 0.154.5– –––––40 0.151.0
M83400.81950.154.5– – – 185 0.154.5– –––––– ––

SDEX 09

ICD1S
[mm][mm][mm]RE
09039.5254.403.18

15° IC S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfap vcap f vcap f vcfapvcap f vcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
F
20°
Geometry 74 with positive design for 45° chamfer milling.
M8330 SDEX 090308FN-74 0.8305 0.12 4.5180 0.11 4.5285 0.12 4.5–––75 0.11 3.6–––