DC DN DCON MS 9 S233 2-Flute Solid Carbide Ball-Nosed End Mill, Extra Long Reach Extra short cut length, extra long reach, 2-flute design with neck recess provides high rigidity and reduces vibrations. Ball nosed geometry is designed for high performance contouring of complex surfaces. TiSiN coating increases tool life and improves performance when milling difficult to machine materials. RE N NOF2 APMX l g LU 30° 3° OAL DC DIN 6535HA TiSiN h9 Workpiece material group suitability, starting values for cutting speed (m/min) and Alpha Code. Tables with feed per tooth and correction factors can be found starting from page 112. P4.3 M2.3 M3.3 M4.1 M4.2 S1.3 S2.2 S3.2 S4.2 40 F 40 F 41 F 40 F 34 F 29 F 24 F 17 F 14 F DCON MS tolerance h6; RE +0/-0.02 mm. Product DC RE DCON MS APMX OAL NOF LU DN [mm] [mm] [mm] [mm] [mm] [mm] [mm] S2332.0XD3 2.00 1.00 3.00 4.00 100.0 2 20.00 1.90 S2332.0XD4 2.00 1.00 4.00 4.00 100.0 2 20.00 1.90 S2333.0XD3 3.00 1.50 3.00 5.00 100.0 2 30.00 2.80 S2333.0XD6 3.00 1.50 6.00 5.00 100.0 2 30.00 2.80 S2334.0XD4 4.00 2.00 4.00 8.00 100.0 2 40.00 3.70 S2334.0XD6 4.00 2.00 6.00 8.00 100.0 2 40.00 3.70 S2335.0 5.00 2.50 5.00 9.00 100.0 2 50.00 4.60 S2336.0 6.00 3.00 6.00 10.00 100.0 2 60.00 5.50 S2338.0 8.00 4.00 8.00 12.00 100.0 2 60.00 7.40 S23310.0 10.00 5.00 10.00 14.00 125.0 2 85.00 9.20 S23312.0 12.00 6.00 12.00 16.00 125.0 2 85.00 11.00 S23314.0 14.00 7.00 14.00 32.00 150.0 2 110.00 13.00 S23316.0 16.00 8.00 16.00 32.00 150.0 2 110.00 15.00 59