Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 677

Предыдущая страница Следующая страница

Навигация

RPEX

INSDD1S
[mm][mm][mm]
120412.04.404.76

11° INSD S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfap vcap f vcap f vcfapvcap f vcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
S
0,1HFC
20° 15°
Positive design for finish machining.
RPEX 1204MOSN-12 M8330–235 0.30 1.5140 0.27 1.5220 0.30 1.5–––55 0.21 1.2–––
M8340–215 0.30 1.5125 0.27 1.5200 0.30 1.5–––50 0.21 1.2–––
SEEN
ICMS
45°
[mm][mm][mm]
120312.70023.18
150415.87524.76M

25°

20° IC S

Suitability and starting values for cutting speed (vc), feed (f)and depth of cut (ap). Refer toour MachiningCalculator app for further calculations.
REPMKNSH
Product
vcfapvcfap vcfapvc fapvcfapvcfap
[mm][m/min][mm/tooth][mm][m/min] [mm/tooth][mm] [m/min][mm/tooth][mm][m/min] [mm/tooth][mm][m/min][mm/tooth][mm][m/min] [mm/tooth][mm]
F
AFFN edge preperation, zero rakeangle geometry for light to medium machining.
SEEN 1203AFFNM8330–2700.152.01600.142.0 2550.152.0– ––––––––
M8340–2450.152.01450.142.0 2300.152.0– ––––––––
20°0,1S
AFSN edge preperation, zero rakeangle geometry for medium toheavymachining.
SEEN 1203AFSN8215–2550.202.0––– 2400.202.0– –––––500.151.0
M8330–2550.202.0––– 2400.202.0– –––––500.151.0
M8340–2300.202.0––– 2150.202.0– ––––––––
M9315–3400.202.0––– 3200.202.0– –––––650.151.0
M9325–3150.202.0––– 2950.202.0– –––––600.151.0
M9340–2850.202.0––– –––– ––––––––