Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 687

Предыдущая страница Следующая страница

Навигация

Suitability and starting valuesfor cutting speed (vc), feed (f) and depth of cut (ap). Refer to our MachiningCalculator app for further calculations.
PdREPM KNSH
rouctvcf apvc f ap vc f apvc f apvcf apvc fap
[mm][m/min][mm/tooth] [mm][m/min] [mm/tooth] [mm] [m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min][mm/tooth] [mm][m/min] [mm/tooth] [mm]
0,41S
20°Zero rakegeometry milling insert, can also be used for turning.
SPUN 250616SM8326 1.61150.40 12.0– – – 105 0.40 12.0– – ––– –– ––
SPUN 250620SM5326 2.01450.40 12.0– – – 135 0.40 12.0– – ––– –– ––
M8326 2.01200.40 12.0– – – 110 0.40 12.0– – ––– –– ––
M8346 2.01000.40 12.0– – – – – –– – ––– –– ––
S26 2.0450.40 12.0– – – – – –– – ––– –– ––
TNJF
IC [mm]L [mm]M [mm]S [mm]60°
1204 12.70022.0024.76ICLMS

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcap f vcap f vcap f vcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
E
15°
Positive rake angle with chip breaking geometry.
M8330 TNJF 1204ANEN –270 0.15 4.0160 0.14 4.0255 0.15 4.0–––––––––