Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 624

Предыдущая страница Следующая страница

Навигация

Nm
CO314US44012-T15P3.5M 412––FlagT15P–
CO316US44012-T15P3.5M 412D-T08P/T15PFG-15–HCS 0840C
CO318US44012-T15P3.5M 412D-T08P/T15PFG-15–HS 90835
CO320US44012-T15P3.5M 412D-T08P/T15PFG-15–HS1030C
CO322US44012-T15P3.5M 412D-T08P/T15PFG-15–HS1230C
CO324US44012-T15P3.5M 412D-T08P/T15PFG-15––
AC001KS1230K.FMH27
AC002KS1635K.FMH32
AC003KS2040K.FMH40

SNGX 11

ICD1S
[mm][mm][mm]
110410.6004.564.76RE

IC S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcap f vcfapvcfapvcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
1S
0,2 17°
M geometry with positive design for high feed machining.
SNGX 110416SR-M 82151.6260 0.60 1.0–––245 0.60 1.0–––––––––
M83101.6275 0.60 1.0–––260 0.60 1.0–––––––––
M83301.6260 0.60 1.0–––245 0.60 1.0–––––––––
M83401.6245 0.60 1.0–––230 0.60 1.0–––––––––
M93251.6305 0.60 1.0–––285 0.60 1.0–––––––––
M93401.6270 0.60 1.0–––––––––––––––
S
0,1 22°
8°HFC
MM geometry with highly positive design for high feed machining.
SNGX 110416SR-MM M63301.6175 0.60 1.0125 0.54 1.0––––––50 0.42 0.8–––
M83401.6190 0.60 1.0110 0.54 1.0––––––45 0.42 0.8–––
M83451.6150 0.60 1.090 0.54 1.0––––––35 0.42 0.8–––
M93401.6210 0.60 1.0125 0.54 1.0––––––50 0.42 0.8–––